Lua Lua 5.0 Reference Manual

by Roberto Ierusalimschy, Luiz Henrique de Figueiredo, Waldemar Celes

Copyright © 2003 Tecgraf, PUC-Rio. All rights reserved.


1 - Introduction

Lua is an extension programming language designed to support general procedural programming with data description facilities. It also offers good support for object-oriented programming, functional programming, and data-driven programming. Lua is intended to be used as a powerful, light-weight configuration language for any program that needs one. Lua is implemented as a library, written in clean C (that is, in the common subset of ANSI C and C++).

Being an extension language, Lua has no notion of a "main" program: it only works embedded in a host client, called the embedding program or simply the host. This host program can invoke functions to execute a piece of Lua code, can write and read Lua variables, and can register C functions to be called by Lua code. Through the use of C functions, Lua can be augmented to cope with a wide range of different domains, thus creating customized programming languages sharing a syntactical framework.

The Lua distribution includes a stand-alone embedding program, lua, that uses the Lua library to offer a complete Lua interpreter.

Lua is free software, and is provided as usual with no guarantees, as stated in its copyright notice. The implementation described in this manual is available at Lua's official web site, www.lua.org.

Like any other reference manual, this document is dry in places. For a discussion of the decisions behind the design of Lua, see the papers below, which are available at Lua's web site.

Lua means "moon" in Portuguese and is pronounced LOO-ah.

2 - The Language

This section describes the lexis, the syntax, and the semantics of Lua. In other words, this section describes which tokens are valid, how they can be combined, and what their combinations mean.

The language constructs will be explained using the usual extended BNF, in which {a} means 0 or more a's, and [a] means an optional a. Non-terminals are shown in italics, keywords are shown in bold, and other terminal symbols are shown in typewriter font, enclosed in single quotes.

2.1 - Lexical Conventions

Identifiers in Lua can be any string of letters, digits, and underscores, not beginning with a digit. This coincides with the definition of identifiers in most languages. (The definition of letter depends on the current locale: any character considered alphabetic by the current locale can be used in an identifier.)

The following keywords are reserved and cannot be used as identifiers:

       and       break     do        else      elseif
       end       false     for       function  if
       in        local     nil       not       or
       repeat    return    then      true      until     while

Lua is a case-sensitive language: and is a reserved word, but And and AND are two different, valid identifiers. As a convention, identifiers starting with an underscore followed by uppercase letters (such as _VERSION) are reserved for internal variables used by Lua.

The following strings denote other tokens:

       +     -     *     /     ^     =
       ~=    <=    >=    <     >     ==
       (     )     {     }     [     ]
       ;     :     ,     .     ..    ...

Literal strings can be delimited by matching single or double quotes, and can contain the following C-like escape sequences:

Moreover, a `\newline´ (that is, a backslash followed by a real newline) results in a newline in the string. A character in a string may also be specified by its numerical value using the escape sequence `\ddd´, where ddd is a sequence of up to three decimal digits. Strings in Lua may contain any 8-bit value, including embedded zeros, which can be specified as `\0´.

Literal strings can also be delimited by matching double square brackets [[ · · · ]]. Literals in this bracketed form may run for several lines, may contain nested [[ · · · ]] pairs, and do not interpret any escape sequences. For convenience, when the opening `[[´ is immediately followed by a newline, the newline is not included in the string. As an example, in a system using ASCII (in which `a´ is coded as 97, newline is coded as 10, and `1´ is coded as 49), the four literals below denote the same string:

      (1)   "alo\n123\""
      (2)   '\97lo\10\04923"'
      (3)   [[alo
            123"]]
      (4)   [[
            alo
            123"]]

Numerical constants may be written with an optional decimal part and an optional decimal exponent. Examples of valid numerical constants are

       3     3.0     3.1416  314.16e-2   0.31416E1

Comments start anywhere outside a string with a double hyphen (--). If the text immediately after -- is different from [[, the comment is a short comment, which runs until the end of the line. Otherwise, it is a long comment, which runs until the corresponding ]]. Long comments may run for several lines and may contain nested [[ · · · ]] pairs.

For convenience, the first line of a chunk is skipped if it starts with #. This facility allows the use of Lua as a script interpreter in Unix systems (see 6).

2.2 - Values and Types

Lua is a dynamically typed language. That means that variables do not have types; only values do. There are no type definitions in the language. All values carry their own type.

There are eight basic types in Lua: nil, boolean, number, string, function, userdata, thread, and table. Nil is the type of the value nil, whose main property is to be different from any other value; usually it represents the absence of a useful value. Boolean is the type of the values false and true. In Lua, both nil and false make a condition false; any other value makes it true. Number represents real (double-precision floating-point) numbers. (It is easy to build Lua interpreters that use other internal representations for numbers, such as single-precision float or long integers.) String represents arrays of characters. Lua is 8-bit clean: Strings may contain any 8-bit character, including embedded zeros ('\0') (see 2.1).

Functions are first-class values in Lua. That means that functions can be stored in variables, passed as arguments to other functions, and returned as results. Lua can call (and manipulate) functions written in Lua and functions written in C (see 2.5.7).

The type userdata is provided to allow arbitrary C data to be stored in Lua variables. This type corresponds to a block of raw memory and has no pre-defined operations in Lua, except assignment and identity test. However, by using metatables, the programmer can define operations for userdata values (see 2.8). Userdata values cannot be created or modified in Lua, only through the C API. This guarantees the integrity of data owned by the host program.

The type thread represents independent threads of execution and it is used to implement coroutines.

The type table implements associative arrays, that is, arrays that can be indexed not only with numbers, but with any value (except nil). Moreover, tables can be heterogeneous, that is, they can contain values of all types (except nil). Tables are the sole data structuring mechanism in Lua; they may be used to represent ordinary arrays, symbol tables, sets, records, graphs, trees, etc. To represent records, Lua uses the field name as an index. The language supports this representation by providing a.name as syntactic sugar for a["name"]. There are several convenient ways to create tables in Lua (see 2.5.6).

Like indices, the value of a table field can be of any type (except nil). In particular, because functions are first class values, table fields may contain functions. Thus tables may also carry methods (see 2.5.8).

Tables, functions, and userdata values are objects: variables do not actually contain these values, only references to them. Assignment, parameter passing, and function returns always manipulate references to such values; these operations do not imply any kind of copy.

The library function type returns a string describing the type of a given value (see 5.1).

2.2.1 - Coercion

Lua provides automatic conversion between string and number values at run time. Any arithmetic operation applied to a string tries to convert that string to a number, following the usual rules. Conversely, whenever a number is used where a string is expected, the number is converted to a string, in a reasonable format. For complete control of how numbers are converted to strings, use the format function from the string library (see 5.3).

2.3 - Variables

Variables are places that store values. There are three kinds of variables in Lua: global variables, local variables, and table fields.

A single name can denote a global variable or a local variable (or a formal parameter of a function, which is a particular form of local variable):

	var ::= Name
Variables are assumed to be global unless explicitly declared local (see 2.4.7). Local variables are lexically scoped: Local variables can be freely accessed by functions defined inside their scope (see 2.6).

Before the first assignment to a variable, its value is nil.

Square brackets are used to index a table:

	var ::= prefixexp `[´ exp `]´
The first expression (prefixexp)should result in a table value; the second expression (exp) identifies a specific entry inside that table. The expression denoting the table to be indexed has a restricted syntax; see 2.5 for details.

The syntax var.NAME is just syntactic sugar for var["NAME"]:

	var ::= prefixexp `.´ Name

The meaning of accesses to global variables and table fields can be changed via metatables. An access to an indexed variable t[i] is equivalent to a call gettable_event(t,i). (See 2.8 for a complete description of the gettable_event function. This function is not defined or callable in Lua. We use it here only for explanatory purposes.)

All global variables live as fields in ordinary Lua tables, called environment tables or simply environments. Functions written in C and exported to Lua (C functions) all share a common global environment. Each function written in Lua (a Lua function) has its own reference to an environment, so that all global variables in that function will refer to that environment table. When a function is created, it inherits the environment from the function that created it. To change or get the environment table of a Lua function, you call setfenv or getfenv (see 5.1).

An access to a global variable x is equivalent to _env.x, which in turn is equivalent to

       gettable_event(_env, "x")
where _env is the environment of the running function. (The _env variable is not defined in Lua. We use it here only for explanatory purposes.)

2.4 - Statements

Lua supports an almost conventional set of statements, similar to those in Pascal or C. This set includes assignment, control structures, procedure calls, table constructors, and variable declarations.

2.4.1 - Chunks

The unit of execution of Lua is called a chunk. A chunk is simply a sequence of statements, which are executed sequentially. Each statement can be optionally followed by a semicolon:

	chunk ::= {stat [`;´]}

Lua handles a chunk as the body of an anonymous function (see 2.5.8). As such, chunks can define local variables and return values.

A chunk may be stored in a file or in a string inside the host program. When a chunk is executed, first it is pre-compiled into opcodes for a virtual machine, and then the compiled code is executed by an interpreter for the virtual machine.

Chunks may also be pre-compiled into binary form; see program luac for details. Programs in source and compiled forms are interchangeable; Lua automatically detects the file type and acts accordingly.

2.4.2 - Blocks

A block is a list of statements; syntactically, a block is equal to a chunk:
	block ::= chunk

A block may be explicitly delimited to produce a single statement:

	stat ::= do block end
Explicit blocks are useful to control the scope of variable declarations. Explicit blocks are also sometimes used to add a return or break statement in the middle of another block (see 2.4.4).

2.4.3 - Assignment

Lua allows multiple assignment. Therefore, the syntax for assignment defines a list of variables on the left side and a list of expressions on the right side. The elements in both lists are separated by commas:

	stat ::= varlist1 `=´ explist1
	varlist1 ::= var {`,´ var}
	explist1 ::= exp {`,´ exp}
Expressions are discussed in 2.5.

Before the assignment, the list of values is adjusted to the length of the list of variables. If there are more values than needed, the excess values are thrown away. If there are fewer values than needed, the list is extended with as many nil's as needed. If the list of expressions ends with a function call, then all values returned by that function call enter in the list of values, before the adjustment (except when the call is enclosed in parentheses; see 2.5).

The assignment statement first evaluates all its expressions and only then are the assignments performed. Thus the code

       i = 3
       i, a[i] = i+1, 20
sets a[3] to 20, without affecting a[4] because the i in a[i] is evaluated (to 3) before it is assigned 4. Similarly, the line
       x, y = y, x
exchanges the values of x and y.

The meaning of assignments to global variables and table fields can be changed via metatables. An assignment to an indexed variable t[i] = val is equivalent to settable_event(t,i,val). (See 2.8 for a complete description of the settable_event function. This function is not defined or callable in Lua. We use it here only for explanatory purposes.)

An assignment to a global variable x = val is equivalent to the assignment _env.x = val, which in turn is equivalent to

       settable_event(_env, "x", val)
where _env is the environment of the running function. (The _env variable is not defined in Lua. We use it here only for explanatory purposes.)

2.4.4 - Control Structures

The control structures if, while, and repeat have the usual meaning and familiar syntax:
	stat ::= while exp do block end
	stat ::= repeat block until exp
	stat ::= if exp then block {elseif exp then block} [else block] end
Lua also has a for statement, in two flavors (see 2.4.5).

The condition expression exp of a control structure may return any value. Both false and nil are considered false. All values different from nil and false are considered true (in particular, the number 0 and the empty string are also true).

The return statement is used to return values from a function or from a chunk. Functions and chunks may return more than one value, so the syntax for the return statement is

	stat ::= return [explist1]

The break statement can be used to terminate the execution of a while, repeat, or for loop, skipping to the next statement after the loop:

	stat ::= break
A break ends the innermost enclosing loop.

For syntactic reasons, return and break statements can only be written as the last statement of a block. If it is really necessary to return or break in the middle of a block, then an explicit inner block can be used, as in the idioms `do return end´ and `do break end´, because now return and break are the last statements in their (inner) blocks. In practice, those idioms are only used during debugging.

2.4.5 - For Statement

The for statement has two forms: one numeric and one generic.

The numeric for loop repeats a block of code while a control variable runs through an arithmetic progression. It has the following syntax:

	stat ::= for Name `=´ exp `,´ exp [`,´ exp] do block end
The block is repeated for name starting at the value of the first exp, until it passes the second exp by steps of the third exp. More precisely, a for statement like
       for var = e1, e2, e3 do block end
is equivalent to the code:
       do
         local var, _limit, _step = tonumber(e1), tonumber(e2), tonumber(e3)
         if not (var and _limit and _step) then error() end
         while (_step>0 and var<=_limit) or (_step<=0 and var>=_limit) do
           block
           var = var + _step
         end
       end
Note the following:

The generic for statement works over functions, called iterators. For each iteration, it calls its iterator function to produce a new value, stopping when the new value is nil. The generic for loop has the following syntax:

	stat ::= for Name {`,´ Name} in explist1 do block end
A for statement like
       for var_1, ..., var_n in explist do block end
is equivalent to the code:
       do
         local _f, _s, var_1 = explist
         local var_2, ... , var_n
         while true do
           var_1, ..., var_n = _f(_s, var_1)
           if var_1 == nil then break end
           block
         end
       end
Note the following:

2.4.6 - Function Calls as Statements

To allow possible side-effects, function calls can be executed as statements:
	stat ::= functioncall
In this case, all returned values are thrown away. Function calls are explained in 2.5.7.

2.4.7 - Local Declarations

Local variables may be declared anywhere inside a block. The declaration may include an initial assignment:
	stat ::= local namelist [`=´ explist1]
	namelist ::= Name {`,´ Name}
If present, an initial assignment has the same semantics of a multiple assignment (see 2.4.3). Otherwise, all variables are initialized with nil.

A chunk is also a block (see 2.4.1), so local variables can be declared in a chunk outside any explicit block. Such local variables die when the chunk ends.

The visibility rules for local variables are explained in 2.6.

2.5 - Expressions

The basic expressions in Lua are the following:

	exp ::= prefixexp
	exp ::= nil | false | true
	exp ::= Number
	exp ::= Literal
	exp ::= function
	exp ::= tableconstructor
	prefixexp ::= var | functioncall | `(´ exp `)´

Numbers and literal strings are explained in 2.1; variables are explained in 2.3; function definitions are explained in 2.5.8; function calls are explained in 2.5.7; table constructors are explained in 2.5.6.

An expression enclosed in parentheses always results in only one value. Thus, (f(x,y,z)) is always a single value, even if f returns several values. (The value of (f(x,y,z)) is the first value returned by f or nil if f does not return any values.)

Expressions can also be built with arithmetic operators, relational operators, and logical operators, all of which are explained below.

2.5.1 - Arithmetic Operators

Lua supports the usual arithmetic operators: the binary + (addition), - (subtraction), * (multiplication), / (division), and ^ (exponentiation); and unary - (negation). If the operands are numbers, or strings that can be converted to numbers (see 2.2.1), then all operations except exponentiation have the usual meaning. Exponentiation calls a global function __pow; otherwise, an appropriate metamethod is called (see 2.8). The standard mathematical library defines function __pow, giving the expected meaning to exponentiation (see 5.5).

2.5.2 - Relational Operators

The relational operators in Lua are
       ==    ~=    <     >     <=    >=
These operators always result in false or true.

Equality (==) first compares the type of its operands. If the types are different, then the result is false. Otherwise, the values of the operands are compared. Numbers and strings are compared in the usual way. Objects (tables, userdata, threads, and functions) are compared by reference: Two objects are considered equal only if they are the same object. Every time you create a new object (a table, userdata, or function), this new object is different from any previously existing object.

You can change the way that Lua compares tables and userdata using the "eq" metamethod (see 2.8).

The conversion rules of 2.2.1 do not apply to equality comparisons. Thus, "0"==0 evaluates to false, and t[0] and t["0"] denote different entries in a table.

The operator ~= is exactly the negation of equality (==).

The order operators work as follows. If both arguments are numbers, then they are compared as such. Otherwise, if both arguments are strings, then their values are compared according to the current locale. Otherwise, Lua tries to call the "lt" or the "le" metamethod (see 2.8).

2.5.3 - Logical Operators

The logical operators in Lua are
       and   or    not
Like the control structures (see 2.4.4), all logical operators consider both false and nil as false and anything else as true.

The operator not always return false or true.

The conjunction operator and returns its first argument if this value is false or nil; otherwise, and returns its second argument. The disjunction operator or returns its first argument if this value is different from nil and false; otherwise, or returns its second argument. Both and and or use short-cut evaluation, that is, the second operand is evaluated only if necessary. For example,

       10 or error()       -> 10
       nil or "a"          -> "a"
       nil and 10          -> nil
       false and error()   -> false
       false and nil       -> false
       false or nil        -> nil
       10 and 20           -> 20

2.5.4 - Concatenation

The string concatenation operator in Lua is denoted by two dots (`..´). If both operands are strings or numbers, then they are converted to strings according to the rules mentioned in 2.2.1. Otherwise, the "concat" metamethod is called (see 2.8).

2.5.5 - Precedence

Operator precedence in Lua follows the table below, from lower to higher priority:
       or
       and
       <     >     <=    >=    ~=    ==
       ..
       +     -
       *     /
       not   - (unary)
       ^
You can use parentheses to change the precedences in an expression. The concatenation (`..´) and exponentiation (`^´) operators are right associative. All other binary operators are left associative.

2.5.6 - Table Constructors

Table constructors are expressions that create tables. Every time a constructor is evaluated, a new table is created. Constructors can be used to create empty tables, or to create a table and initialize some of its fields. The general syntax for constructors is
	tableconstructor ::= `{´ [fieldlist] `}´
	fieldlist ::= field {fieldsep field} [fieldsep]
	field ::= `[´ exp `]´ `=´ exp | Name `=´ exp | exp
	fieldsep ::= `,´ | `;´

Each field of the form [exp1] = exp2 adds to the new table an entry with key exp1 and value exp2. A field of the form name = exp is equivalent to ["name"] = exp. Finally, fields of the form exp are equivalent to [i] = exp, where i are consecutive numerical integers, starting with 1. Fields in the other formats do not affect this counting. For example,

       a = {[f(1)] = g; "x", "y"; x = 1, f(x), [30] = 23; 45}
is equivalent to
       do
         local temp = {}
         temp[f(1)] = g
         temp[1] = "x"         -- 1st exp
         temp[2] = "y"         -- 2nd exp
         temp.x = 1            -- temp["x"] = 1
         temp[3] = f(x)        -- 3rd exp
         temp[30] = 23
         temp[4] = 45          -- 4th exp
         a = temp
       end

If the last field in the list has the form exp and the expression is a function call, then all values returned by the call enter the list consecutively (see 2.5.7). To avoid this, enclose the function call in parentheses (see 2.5).

The field list may have an optional trailing separator, as a convenience for machine-generated code.

2.5.7 - Function Calls

A function call in Lua has the following syntax:
	functioncall ::= prefixexp args
In a function call, first prefixexp and args are evaluated. If the value of prefixexp has type function, then that function is called with the given arguments. Otherwise, its "call" metamethod is called, having as first parameter the value of prefixexp, followed by the original call arguments (see 2.8).

The form

	functioncall ::= prefixexp `:´ Name args
can be used to call "methods". A call v:name(...) is syntactic sugar for v.name(v,...), except that v is evaluated only once.

Arguments have the following syntax:

	args ::= `(´ [explist1] `)´
	args ::= tableconstructor
	args ::= Literal
All argument expressions are evaluated before the call. A call of the form f{...} is syntactic sugar for f({...}), that is, the argument list is a single new table. A call of the form f'...' (or f"..." or f[[...]]) is syntactic sugar for f('...'), that is, the argument list is a single literal string.

Because a function can return any number of results (see 2.4.4), the number of results must be adjusted before they are used. If the function is called as a statement (see 2.4.6), then its return list is adjusted to zero elements, thus discarding all returned values. If the function is called inside another expression or in the middle of a list of expressions, then its return list is adjusted to one element, thus discarding all returned values except the first one. If the function is called as the last element of a list of expressions, then no adjustment is made (unless the call is enclosed in parentheses).

Here are some examples:

       f()                -- adjusted to 0 results
       g(f(), x)          -- f() is adjusted to 1 result
       g(x, f())          -- g gets x plus all values returned by f()
       a,b,c = f(), x     -- f() is adjusted to 1 result (and c gets nil)
       a,b,c = x, f()     -- f() is adjusted to 2 results
       a,b,c = f()        -- f() is adjusted to 3 results
       return f()         -- returns all values returned by f()
       return x,y,f()     -- returns x, y, and all values returned by f()
       {f()}              -- creates a list with all values returned by f()
       {f(), nil}         -- f() is adjusted to 1 result

If you enclose a function call in parentheses, then it is adjusted to return exactly one value:

       return x,y,(f())   -- returns x, y, and the first value from f()
       {(f())}            -- creates a table with exactly one element

As an exception to the free-format syntax of Lua, you cannot put a line break before the `(´ in a function call. That restriction avoids some ambiguities in the language. If you write

       a = f
       (g).x(a)
Lua would read that as a = f(g).x(a). So, if you want two statements, you must add a semi-colon between them. If you actually want to call f, you must remove the line break before (g).

A call of the form return functioncall is called a tail call. Lua implements proper tail calls (or proper tail recursion): In a tail call, the called function reuses the stack entry of the calling function. Therefore, there is no limit on the number of nested tail calls that a program can execute. However, a tail call erases any debug information about the calling function. Note that a tail call only happens with a particular syntax, where the return has one single function call as argument; this syntax makes the calling function returns exactly the returns of the called function. So, all the following examples are not tails calls:

  return (f(x))        -- results adjusted to 1
  return 2 * f(x)
  return x, f(x)       -- additional results
  f(x); return         -- results discarded
  return x or f(x)     -- results adjusted to 1

2.5.8 - Function Definitions

The syntax for function definition is

	function ::= function funcbody
	funcbody ::= `(´ [parlist1] `)´ block end

The following syntactic sugar simplifies function definitions:

	stat ::= function funcname funcbody
	stat ::= local function Name funcbody
	funcname ::= Name {`.´ Name} [`:´ Name]
The statement
       function f () ... end
translates to
       f = function () ... end
The statement
       function t.a.b.c.f () ... end
translates to
       t.a.b.c.f = function () ... end
The statement
       local function f () ... end
translates to
       local f; f = function () ... end

A function definition is an executable expression, whose value has type function. When Lua pre-compiles a chunk, all its function bodies are pre-compiled too. Then, whenever Lua executes the function definition, the function is instantiated (or closed). This function instance (or closure) is the final value of the expression. Different instances of the same function may refer to different external local variables and may have different environment tables.

Parameters act as local variables that are initialized with the argument values:

	parlist1 ::= namelist [`,´ `...´]
	parlist1 ::= `...´
When a function is called, the list of arguments is adjusted to the length of the list of parameters, unless the function is a variadic or vararg function, which is indicated by three dots (`...´) at the end of its parameter list. A vararg function does not adjust its argument list; instead, it collects all extra arguments into an implicit parameter, called arg. The value of arg is a table, with a field n that holds the number of extra arguments and with the extra arguments at positions 1, 2, ..., n.

As an example, consider the following definitions:

       function f(a, b) end
       function g(a, b, ...) end
       function r() return 1,2,3 end
Then, we have the following mapping from arguments to parameters:
       CALL            PARAMETERS

       f(3)             a=3, b=nil
       f(3, 4)          a=3, b=4
       f(3, 4, 5)       a=3, b=4
       f(r(), 10)       a=1, b=10
       f(r())           a=1, b=2

       g(3)             a=3, b=nil, arg={n=0}
       g(3, 4)          a=3, b=4,   arg={n=0}
       g(3, 4, 5, 8)    a=3, b=4,   arg={5, 8; n=2}
       g(5, r())        a=5, b=1,   arg={2, 3; n=2}

Results are returned using the return statement (see 2.4.4). If control reaches the end of a function without encountering a return statement, then the function returns with no results.

The colon syntax is used for defining methods, that is, functions that have an implicit extra parameter self. Thus, the statement

       function t.a.b.c:f (...) ... end
is syntactic sugar for
       t.a.b.c.f = function (self, ...) ... end

2.6 - Visibility Rules

Lua is a lexically scoped language. The scope of variables begins at the first statement after their declaration and lasts until the end of the innermost block that includes the declaration. For instance:

  x = 10                -- global variable
  do                    -- new block
    local x = x         -- new `x', with value 10
    print(x)            --> 10
    x = x+1
    do                  -- another block
      local x = x+1     -- another `x'
      print(x)          --> 12
    end
    print(x)            --> 11
  end
  print(x)              --> 10  (the global one)
Notice that, in a declaration like local x = x, the new x being declared is not in scope yet, and so the second x refers to the outside variable.

Because of the lexical scoping rules, local variables can be freely accessed by functions defined inside their scope. For instance:

  local counter = 0
  function inc (x)
    counter = counter + x
    return counter
  end
A local variable used by an inner function is called an upvalue, or external local variable, inside the inner function.

Notice that each execution of a local statement defines new local variables. Consider the following example:

  a = {}
  local x = 20
  for i=1,10 do
    local y = 0
    a[i] = function () y=y+1; return x+y end
  end
The loop creates ten closures (that is, ten instances of the anonymous function). Each of these closures uses a different y variable, while all of them share the same x.

2.7 - Error Handling

Because Lua is an extension language, all Lua actions start from C code in the host program calling a function from the Lua library (see 3.15). Whenever an error occurs during Lua compilation or execution, control returns to C, which can take appropriate measures (such as print an error message).

Lua code can explicitly generate an error by calling the error function (see 5.1). If you need to catch errors in Lua, you can use the pcall function (see 5.1).

2.8 - Metatables

Every table and userdata object in Lua may have a metatable. This metatable is an ordinary Lua table that defines the behavior of the original table and userdata under certain special operations. You can change several aspects of the behavior of an object by setting specific fields in its metatable. For instance, when an object is the operand of an addition, Lua checks for a function in the field "__add" in its metatable. If it finds one, Lua calls that function to perform the addition.

We call the keys in a metatable events and the values metamethods. In the previous example, the event is "add" and the metamethod is the function that performs the addition.

You can query and change the metatable of an object through the set/getmetatable functions (see 5.1).

A metatable may control how an object behaves in arithmetic operations, order comparisons, concatenation, and indexing. A metatable can also define a function to be called when a userdata is garbage collected. For each of those operations Lua associates a specific key called an event. When Lua performs one of those operations over a table or a userdata, it checks whether that object has a metatable with the corresponding event. If so, the value associated with that key (the metamethod) controls how Lua will perform the operation.

Metatables control the operations listed next. Each operation is identified by its corresponding name. The key for each operation is a string with its name prefixed by two underscores; for instance, the key for operation "add" is the string "__add". The semantics of these operations is better explained by a Lua function describing how the interpreter executes that operation.

The code shown here in Lua is only illustrative; the real behavior is hard coded in the interpreter and it is much more efficient than this simulation. All functions used in these descriptions (rawget, tonumber, etc.) are described in 5.1. In particular, to retrieve the metamethod of a given object, we use the expression

  metatable(obj)[event]
This should be read as
  rawget(metatable(obj) or {}, event)
That is, the access to a metamethod does not invoke other metamethods, and the access to objects with no metatables does not fail (it simply results in nil).

2.9 - Garbage Collection

Lua does automatic memory management. That means that you do not have to worry about allocating memory for new objects and freeing it when the objects are no longer needed. Lua manages memory automatically by running a garbage collector from time to time to collect all dead objects (that is, those objects that are no longer accessible from Lua). All objects in Lua are subject to automatic management: tables, userdata, functions, threads, and strings.

Lua uses two numbers to control its garbage-collection cycles. One number counts how many bytes of dynamic memory Lua is using; the other is a threshold. When the number of bytes crosses the threshold, Lua runs the garbage collector, which reclaims the memory of all dead objects. The byte counter is adjusted, and then the threshold is reset to twice the new value of the byte counter.

Through the C API, you can query those numbers and change the threshold (see 3.7). Setting the threshold to zero actually forces an immediate garbage-collection cycle, while setting it to a huge number effectively stops the garbage collector. Using Lua code you have a more limited control over garbage-collection cycles, through the gcinfo and collectgarbage functions (see 5.1).

2.9.1 - Garbage-Collection Metamethods

Using the C API, you can set garbage-collector metamethods for userdata (see 2.8). These metamethods are also called finalizers. Finalizers allow you to coordinate Lua's garbage collection with external resource management (such as closing files, network or database connections, or freeing your own memory).

Free userdata with a field __gc in their metatables are not collected immediately by the garbage collector. Instead, Lua puts them in a list. After the collection, Lua does the equivalent of the following function for each userdata in that list:

 function gc_event (udata)
   local h = metatable(udata).__gc
   if h then
     h(udata)
   end
 end

At the end of each garbage-collection cycle, the finalizers for userdata are called in reverse order of their creation, among those collected in that cycle. That is, the first finalizer to be called is the one associated with the userdata created last in the program.

2.9.2 - Weak Tables

A weak table is a table whose elements are weak references. A weak reference is ignored by the garbage collector. In other words, if the only references to an object are weak references, then the garbage collector will collect that object.

A weak table can have weak keys, weak values, or both. A table with weak keys allows the collection of its keys, but prevents the collection of its values. A table with both weak keys and weak values allows the collection of both keys and values. In any case, if either the key or the value is collected, the whole pair is removed from the table. The weakness of a table is controlled by the value of the __mode field of its metatable. If the __mode field is a string containing the character `k´, the keys in the table are weak. If __mode contains `v´, the values in the table are weak.

After you use a table as a metatable, you should not change the value of its field __mode. Otherwise, the weak behavior of the tables controlled by this metatable is undefined.

2.10 - Coroutines

Lua supports coroutines, also called semi-coroutines or collaborative multithreading. A coroutine in Lua represents an independent thread of execution. Unlike threads in multithread systems, however, a coroutine only suspends its execution by explicitly calling a yield function.

You create a coroutine with a call to coroutine.create. Its sole argument is a function that is the main function of the coroutine. The create function only creates a new coroutine and returns a handle to it (an object of type thread); it does not start the coroutine execution.

When you first call coroutine.resume, passing as its first argument the thread returned by coroutine.create, the coroutine starts its execution, at the first line of its main function. Extra arguments passed to coroutine.resume are given as parameters for the coroutine main function. After the coroutine starts running, it runs until it terminates or yields.

A coroutine can terminate its execution in two ways: Normally, when its main function returns (explicitly or implicitly, after the last instruction); and abnormally, if there is an unprotected error. In the first case, coroutine.resume returns true, plus any values returned by the coroutine main function. In case of errors, coroutine.resume returns false plus an error message.

A coroutine yields by calling coroutine.yield. When a coroutine yields, the corresponding coroutine.resume returns immediately, even if the yield happens inside nested function calls (that is, not in the main function, but in a function directly or indirectly called by the main function). In the case of a yield, coroutine.resume also returns true, plus any values passed to coroutine.yield. The next time you resume the same coroutine, it continues its execution from the point where it yielded, with the call to coroutine.yield returning any extra arguments passed to coroutine.resume.

The coroutine.wrap function creates a coroutine like coroutine.create, but instead of returning the coroutine itself, it returns a function that, when called, resumes the coroutine. Any arguments passed to that function go as extra arguments to resume. The function returns all the values returned by resume, except the first one (the boolean error code). Unlike coroutine.resume, this function does not catch errors; any error is propagated to the caller.

As an example, consider the next code:

function foo1 (a)
  print("foo", a)
  return coroutine.yield(2*a)
end

co = coroutine.create(function (a,b)
      print("co-body", a, b)
      local r = foo1(a+1)
      print("co-body", r)
      local r, s = coroutine.yield(a+b, a-b)
      print("co-body", r, s)
      return b, "end"
end)
       
a, b = coroutine.resume(co, 1, 10)
print("main", a, b)
a, b, c = coroutine.resume(co, "r")
print("main", a, b, c)
a, b, c = coroutine.resume(co, "x", "y")
print("main", a, b, c)
a, b = coroutine.resume(co, "x", "y")
print("main", a, b)
When you run it, it produces the following output:
co-body 1       10
foo     2
main    true    4
co-body r
main    true    11      -9
co-body x       y
main    true    10      end
main    false   cannot resume dead coroutine

3 - The Application Program Interface

This section describes the C API for Lua, that is, the set of C functions available to the host program to communicate with Lua. All API functions and related types and constants are declared in the header file lua.h.

Even when we use the term "function", any facility in the API may be provided as a macro instead. All such macros use each of its arguments exactly once (except for the first argument, which is always a Lua state), and so do not generate hidden side-effects.

3.1 - States

The Lua library is fully reentrant: it has no global variables. The whole state of the Lua interpreter (global variables, stack, etc.) is stored in a dynamically allocated structure of type lua_State. A pointer to this state must be passed as the first argument to every function in the library, except to lua_open, which creates a Lua state from scratch.

Before calling any API function, you must create a state by calling lua_open:

       lua_State *lua_open (void);

To release a state created with lua_open, call lua_close:

       void lua_close (lua_State *L);
This function destroys all objects in the given Lua state (calling the corresponding garbage-collection metamethods, if any) and frees all dynamic memory used by that state. On several platforms, you may not need to call this function, because all resources are naturally released when the host program ends. On the other hand, long-running programs, such as a daemon or a web server, might need to release states as soon as they are not needed, to avoid growing too large.

3.2 - The Stack and Indices

Lua uses a virtual stack to pass values to and from C. Each element in this stack represents a Lua value (nil, number, string, etc.).

Whenever Lua calls C, the called function gets a new stack, which is independent of previous stacks and of stacks of C functions that are still active. That stack initially contains any arguments to the C function, and it is where the C function pushes its results to be returned to the caller (see 3.16) to be returned to the caller.

For convenience, most query operations in the API do not follow a strict stack discipline. Instead, they can refer to any element in the stack by using an index: A positive index represents an absolute stack position (starting at 1); a negative index represents an offset from the top of the stack. More specifically, if the stack has n elements, then index 1 represents the first element (that is, the element that was pushed onto the stack first) and index n represents the last element; index -1 also represents the last element (that is, the element at the top) and index -n represents the first element. We say that an index is valid if it lies between 1 and the stack top (that is, if 1 <= abs(index) <= top).

At any time, you can get the index of the top element by calling lua_gettop:

       int lua_gettop (lua_State *L);
Because indices start at 1, the result of lua_gettop is equal to the number of elements in the stack (and so 0 means an empty stack).

When you interact with Lua API, you are responsible for controlling stack overflow. The function

       int lua_checkstack (lua_State *L, int extra);
grows the stack size to top + extra elements; it returns false if it cannot grow the stack to that size. This function never shrinks the stack; if the stack is already larger than the new size, it is left unchanged.

Whenever Lua calls C, it ensures that at least LUA_MINSTACK stack positions are available. LUA_MINSTACK is defined in lua.h as 20, so that usually you do not have to worry about stack space unless your code has loops pushing elements onto the stack.

Most query functions accept as indices any value inside the available stack space, that is, indices up to the maximum stack size you have set through lua_checkstack. Such indices are called acceptable indices. More formally, we define an acceptable index as follows:

     (index < 0 && abs(index) <= top) || (index > 0 && index <= stackspace)
Note that 0 is never an acceptable index.

Unless otherwise noted, any function that accepts valid indices can also be called with pseudo-indices, which represent some Lua values that are accessible to the C code but are not in the stack. Pseudo-indices are used to access the global environment, the registry, and the upvalues of a C function (see 3.17).

3.3 - Stack Manipulation

The API offers the following functions for basic stack manipulation:
       void lua_settop    (lua_State *L, int index);
       void lua_pushvalue (lua_State *L, int index);
       void lua_remove    (lua_State *L, int index);
       void lua_insert    (lua_State *L, int index);
       void lua_replace   (lua_State *L, int index);

lua_settop accepts any acceptable index, or 0, and sets the stack top to that index. If the new top is larger than the old one, then the new elements are filled with nil. If index is 0, then all stack elements are removed. A useful macro defined in the lua.h is

       #define lua_pop(L,n)   lua_settop(L, -(n)-1)
which pops n elements from the stack.

lua_pushvalue pushes onto the stack a copy of the element at the given index. lua_remove removes the element at the given position, shifting down the elements above that position to fill the gap. lua_insert moves the top element into the given position, shifting up the elements above that position to open space. lua_replace moves the top element into the given position, without shifting any element (therefore replacing the value at the given position). All these functions accept only valid indices. (You cannot call lua_remove or lua_insert with pseudo-indices, as they do not represent a stack position.)

As an example, if the stack starts as 10 20 30 40 50* (from bottom to top; the `*´ marks the top), then

       lua_pushvalue(L, 3)    --> 10 20 30 40 50 30*
       lua_pushvalue(L, -1)   --> 10 20 30 40 50 30 30*
       lua_remove(L, -3)      --> 10 20 30 40 30 30*
       lua_remove(L,  6)      --> 10 20 30 40 30*
       lua_insert(L,  1)      --> 30 10 20 30 40*
       lua_insert(L, -1)      --> 30 10 20 30 40*  (no effect)
       lua_replace(L, 2)      --> 30 40 20 30*
       lua_settop(L, -3)      --> 30 40*
       lua_settop(L,  6)      --> 30 40 nil nil nil nil*

3.4 - Querying the Stack

To check the type of a stack element, the following functions are available:

       int lua_type            (lua_State *L, int index);
       int lua_isnil           (lua_State *L, int index);
       int lua_isboolean       (lua_State *L, int index);
       int lua_isnumber        (lua_State *L, int index);
       int lua_isstring        (lua_State *L, int index);
       int lua_istable         (lua_State *L, int index);
       int lua_isfunction      (lua_State *L, int index);
       int lua_iscfunction     (lua_State *L, int index);
       int lua_isuserdata      (lua_State *L, int index);
       int lua_islightuserdata (lua_State *L, int index);
These functions can be called with any acceptable index.

lua_type returns the type of a value in the stack, or LUA_TNONE for a non-valid index (that is, if that stack position is "empty"). The types returned by lua_type are coded by the following constants defined in lua.h: LUA_TNIL, LUA_TNUMBER, LUA_TBOOLEAN, LUA_TSTRING, LUA_TTABLE, LUA_TFUNCTION, LUA_TUSERDATA, LUA_TTHREAD, LUA_TLIGHTUSERDATA. The following function translates these constants to strings:

       const char *lua_typename  (lua_State *L, int type);

The lua_is* functions return 1 if the object is compatible with the given type, and 0 otherwise. lua_isboolean is an exception to this rule: It succeeds only for boolean values (otherwise it would be useless, as any value has a boolean value). They always return 0 for a non-valid index. lua_isnumber accepts numbers and numerical strings; lua_isstring accepts strings and numbers (see 2.2.1); lua_isfunction accepts both Lua functions and C functions; and lua_isuserdata accepts both full and light userdata. To distinguish between Lua functions and C functions, you can use lua_iscfunction. To distinguish between full and light userdata, you can use lua_islightuserdata. To distinguish between numbers and numerical strings, you can use lua_type.

The API also contains functions to compare two values in the stack:

       int lua_equal    (lua_State *L, int index1, int index2);
       int lua_rawequal (lua_State *L, int index1, int index2);
       int lua_lessthan (lua_State *L, int index1, int index2);
lua_equal and lua_lessthan are equivalent to their counterparts in Lua (see 2.5.2). lua_rawequal compares the values for primitive equality, without metamethods. These functions return 0 (false) if any of the indices are non-valid.

3.5 - Getting Values from the Stack

To translate a value in the stack to a specific C type, you can use the following conversion functions:

       int            lua_toboolean   (lua_State *L, int index);
       lua_Number     lua_tonumber    (lua_State *L, int index);
       const char    *lua_tostring    (lua_State *L, int index);
       size_t         lua_strlen      (lua_State *L, int index);
       lua_CFunction  lua_tocfunction (lua_State *L, int index);
       void          *lua_touserdata  (lua_State *L, int index);
       lua_State     *lua_tothread    (lua_State *L, int index);
       void          *lua_topointer   (lua_State *L, int index);
These functions can be called with any acceptable index. When called with a non-valid index, they act as if the given value had an incorrect type.

lua_toboolean converts the Lua value at the given index to a C "boolean" value (0 or 1). Like all tests in Lua, lua_toboolean returns 1 for any Lua value different from false and nil; otherwise it returns 0. It also returns 0 when called with a non-valid index. (If you want to accept only real boolean values, use lua_isboolean to test the type of the value.)

lua_tonumber converts the Lua value at the given index to a number (by default, lua_Number is double). The Lua value must be a number or a string convertible to number (see 2.2.1); otherwise, lua_tonumber returns 0.

lua_tostring converts the Lua value at the given index to a string (const char*). The Lua value must be a string or a number; otherwise, the function returns NULL. If the value is a number, then lua_tostring also changes the actual value in the stack to a string. (This change confuses lua_next when lua_tostring is applied to keys.) lua_tostring returns a fully aligned pointer to a string inside the Lua state. This string always has a zero ('\0') after its last character (as in C), but may contain other zeros in its body. If you do not know whether a string may contain zeros, you can use lua_strlen to get its actual length. Because Lua has garbage collection, there is no guarantee that the pointer returned by lua_tostring will be valid after the corresponding value is removed from the stack. If you need the string after the current function returns, then you should duplicate it or put it into the registry (see 3.18).

lua_tocfunction converts a value in the stack to a C function. This value must be a C function; otherwise, lua_tocfunction returns NULL. The type lua_CFunction is explained in 3.16.

lua_tothread converts a value in the stack to a Lua thread (represented as lua_State *). This value must be a thread; otherwise, lua_tothread returns NULL.

lua_topointer converts a value in the stack to a generic C pointer (void *). The value may be a userdata, a table, a thread, or a function; otherwise, lua_topointer returns NULL. Lua ensures that different objects of the same type return different pointers. There is no direct way to convert the pointer back to its original value. Typically this function is used for debug information.

lua_touserdata is explained in 3.8.

3.6 - Pushing Values onto the Stack

The API has the following functions to push C values onto the stack:

       void lua_pushboolean       (lua_State *L, int b);
       void lua_pushnumber        (lua_State *L, lua_Number n);
       void lua_pushlstring       (lua_State *L, const char *s, size_t len);
       void lua_pushstring        (lua_State *L, const char *s);
       void lua_pushnil           (lua_State *L);
       void lua_pushcfunction     (lua_State *L, lua_CFunction f);
       void lua_pushlightuserdata (lua_State *L, void *p);

These functions receive a C value, convert it to a corresponding Lua value, and push the result onto the stack. In particular, lua_pushlstring and lua_pushstring make an internal copy of the given string. lua_pushstring can only be used to push proper C strings (that is, strings that end with a zero and do not contain embedded zeros); otherwise, you should use the more general lua_pushlstring, which accepts an explicit size.

You can also push "formatted" strings:

       const char *lua_pushfstring  (lua_State *L, const char *fmt, ...);
       const char *lua_pushvfstring (lua_State *L, const char *fmt, va_list argp);
These functions push onto the stack a formatted string and return a pointer to that string. They are similar to sprintf and vsprintf, but with some important differences:

The function

       void lua_concat (lua_State *L, int n);
concatenates the n values at the top of the stack, pops them, and leaves the result at the top. If n is 1, the result is that single string (that is, the function does nothing); if n is 0, the result is the empty string. Concatenation is done following the usual semantics of Lua (see 2.5.4).

3.7 - Controlling Garbage Collection

Lua uses two numbers to control its garbage collection: the count and the threshold (see 2.9). The first counts the amount of memory in use by Lua; when the count reaches the threshold, Lua runs its garbage collector. After the collection, the count is updated and the threshold is set to twice the count value.

You can access the current values of these two numbers through the following functions:

       int  lua_getgccount     (lua_State *L);
       int  lua_getgcthreshold (lua_State *L);
Both return their respective values in Kbytes. You can change the threshold value with
       void  lua_setgcthreshold (lua_State *L, int newthreshold);
Again, the newthreshold value is given in Kbytes. When you call this function, Lua sets the new threshold and checks it against the byte counter. If the new threshold is less than the byte counter, then Lua immediately runs the garbage collector. In particular lua_setgcthreshold(L,0) forces a garbage collection. After the collection, a new threshold is set according to the previous rule.

3.8 - Userdata

Userdata represents C values in Lua. Lua supports two types of userdata: full userdata and light userdata.

A full userdata represents a block of memory. It is an object (like a table): You must create it, it can have its own metatable, and you can detect when it is being collected. A full userdata is only equal to itself (under raw equality).

A light userdata represents a pointer. It is a value (like a number): You do not create it, it has no metatables, it is not collected (as it was never created). A light userdata is equal to "any" light userdata with the same C address.

In Lua code, there is no way to test whether a userdata is full or light; both have type userdata. In C code, lua_type returns LUA_TUSERDATA for full userdata, and LUA_TLIGHTUSERDATA for light userdata.

You can create a new full userdata with the following function:

       void *lua_newuserdata (lua_State *L, size_t size);
This function allocates a new block of memory with the given size, pushes on the stack a new userdata with the block address, and returns this address.

To push a light userdata into the stack you use lua_pushlightuserdata (see 3.6).

lua_touserdata (see 3.5) retrieves the value of a userdata. When applied on a full userdata, it returns the address of its block; when applied on a light userdata, it returns its pointer; when applied on a non-userdata value, it returns NULL.

When Lua collects a full userdata, it calls the userdata's gc metamethod, if any, and then it frees the userdata's corresponding memory.

3.9 - Metatables

The following functions allow you to manipulate the metatables of an object:

       int lua_getmetatable (lua_State *L, int index);
       int lua_setmetatable (lua_State *L, int index);
lua_getmetatable pushes on the stack the metatable of a given object. If the index is not valid, or if the object does not have a metatable, lua_getmetatable returns 0 and pushes nothing on the stack.

lua_setmetatable pops a table from the stack and sets it as the new metatable for the given object. lua_setmetatable returns 0 when it cannot set the metatable of the given object (that is, when the object is neither a userdata nor a table); even then it pops the table from the stack.

3.10 - Loading Lua Chunks

You can load a Lua chunk with lua_load:

       typedef const char * (*lua_Chunkreader)
                                (lua_State *L, void *data, size_t *size);

       int lua_load (lua_State *L, lua_Chunkreader reader, void *data,
                                   const char *chunkname);
The return values of lua_load are: If there are no errors, lua_load pushes the compiled chunk as a Lua function on top of the stack. Otherwise, it pushes an error message.

lua_load automatically detects whether the chunk is text or binary, and loads it accordingly (see program luac).

lua_load uses a user-supplied reader function to read the chunk. Everytime it needs another piece of the chunk, lua_load calls the reader, passing along its data parameter. The reader must return a pointer to a block of memory with a new piece of the chunk and set size to the block size. To signal the end of the chunk, the reader returns NULL. The reader function may return pieces of any size greater than zero.

In the current implementation, the reader function cannot call any Lua function; to ensure that, it always receives NULL as the Lua state.

The chunkname is used for error messages and debug information (see 4).

See the auxiliary library (lauxlib.c) for examples of how to use lua_load and for some ready-to-use functions to load chunks from files and strings.

3.11 - Manipulating Tables

Tables are created by calling the function

       void lua_newtable (lua_State *L);
This function creates a new, empty table and pushes it onto the stack.

To read a value from a table that resides somewhere in the stack, call

       void lua_gettable (lua_State *L, int index);
where index points to the table. lua_gettable pops a key from the stack and returns (on the stack) the contents of the table at that key. The table is left where it was in the stack. As in Lua, this function may trigger a metamethod for the "index" event (see 2.8). To get the real value of any table key, without invoking any metamethod, use the raw version:
       void lua_rawget (lua_State *L, int index);

To store a value into a table that resides somewhere in the stack, you push the key and then the value onto the stack, and call

       void lua_settable (lua_State *L, int index);
where index points to the table. lua_settable pops from the stack both the key and the value. The table is left where it was in the stack. As in Lua, this operation may trigger a metamethod for the "settable" or "newindex" events. To set the real value of any table index, without invoking any metamethod, use the raw version:
       void lua_rawset (lua_State *L, int index);

You can traverse a table with the function

       int lua_next (lua_State *L, int index);
where index points to the table to be traversed. The function pops a key from the stack, and pushes a key-value pair from the table (the "next" pair after the given key). If there are no more elements, then lua_next returns 0 (and pushes nothing). Use a nil key to signal the start of a traversal.

A typical traversal looks like this:

       /* table is in the stack at index `t' */
       lua_pushnil(L);  /* first key */
       while (lua_next(L, t) != 0) {
         /* `key' is at index -2 and `value' at index -1 */
         printf("%s - %s\n",
           lua_typename(L, lua_type(L, -2)), lua_typename(L, lua_type(L, -1)));
         lua_pop(L, 1);  /* removes `value'; keeps `key' for next iteration */
       }

While traversing a table, do not call lua_tostring directly on a key, unless you know that the key is actually a string. Recall that lua_tostring changes the value at the given index; this confuses the next call to lua_next.

3.12 - Manipulating Environments

All global variables are kept in ordinary Lua tables, called environments. The initial environment is called the global environment. This table is always at pseudo-index LUA_GLOBALSINDEX.

To access and change the value of global variables, you can use regular table operations over an environment table. For instance, to access the value of a global variable, do

       lua_pushstring(L, varname);
       lua_gettable(L, LUA_GLOBALSINDEX);

You can change the global environment of a Lua thread using lua_replace.

The following functions get and set the environment of Lua functions:

       void lua_getfenv (lua_State *L, int index);
       int  lua_setfenv (lua_State *L, int index);
lua_getfenv pushes on the stack the environment table of the function at index index in the stack. If the function is a C function, lua_getfenv pushes the global environment. lua_setfenv pops a table from the stack and sets it as the new environment for the function at index index in the stack. If the object at the given index is not a Lua function, lua_setfenv returns 0.

3.13 - Using Tables as Arrays

The API has functions that help to use Lua tables as arrays, that is, tables indexed by numbers only:
       void lua_rawgeti (lua_State *L, int index, int n);
       void lua_rawseti (lua_State *L, int index, int n);

lua_rawgeti pushes the value of the n-th element of the table at stack position index. lua_rawseti sets the value of the n-th element of the table at stack position index to the value at the top of the stack, removing this value from the stack.

3.14 - Calling Functions

Functions defined in Lua and C functions registered in Lua can be called from the host program. This is done using the following protocol: First, the function to be called is pushed onto the stack; then, the arguments to the function are pushed in direct order, that is, the first argument is pushed first. Finally, the function is called using

       void lua_call (lua_State *L, int nargs, int nresults);
nargs is the number of arguments that you pushed onto the stack. All arguments and the function value are popped from the stack, and the function results are pushed. The number of results are adjusted to nresults, unless nresults is LUA_MULTRET. In that case, all results from the function are pushed. Lua takes care that the returned values fit into the stack space. The function results are pushed onto the stack in direct order (the first result is pushed first), so that after the call the last result is on the top.

The following example shows how the host program may do the equivalent to this Lua code:

       a = f("how", t.x, 14)
Here it is in C:
    lua_pushstring(L, "t");
    lua_gettable(L, LUA_GLOBALSINDEX);          /* global `t' (for later use) */
    lua_pushstring(L, "a");                                       /* var name */
    lua_pushstring(L, "f");                                  /* function name */
    lua_gettable(L, LUA_GLOBALSINDEX);               /* function to be called */
    lua_pushstring(L, "how");                                 /* 1st argument */
    lua_pushstring(L, "x");                            /* push the string "x" */
    lua_gettable(L, -5);                      /* push result of t.x (2nd arg) */
    lua_pushnumber(L, 14);                                    /* 3rd argument */
    lua_call(L, 3, 1);         /* call function with 3 arguments and 1 result */
    lua_settable(L, LUA_GLOBALSINDEX);             /* set global variable `a' */
    lua_pop(L, 1);                               /* remove `t' from the stack */
Note that the code above is "balanced": at its end, the stack is back to its original configuration. This is considered good programming practice.

(We did this example using only the raw functions provided by Lua's API, to show all the details. Usually programmers define and use several macros and auxiliary functions that provide higher level access to Lua. See the source code of the standard libraries for examples.)

3.15 - Protected Calls

When you call a function with lua_call, any error inside the called function is propagated upwards (with a longjmp). If you need to handle errors, then you should use lua_pcall:

       int lua_pcall (lua_State *L, int nargs, int nresults, int errfunc);
Both nargs and nresults have the same meaning as in lua_call. If there are no errors during the call, lua_pcall behaves exactly like lua_call. However, if there is any error, lua_pcall catches it, pushes a single value at the stack (the error message), and returns an error code. Like lua_call, lua_pcall always removes the function and its arguments from the stack.

If errfunc is 0, then the error message returned is exactly the original error message. Otherwise, errfunc gives the stack index for an error handler function. (In the current implementation, that index cannot be a pseudo-index.) In case of runtime errors, that function will be called with the error message and its return value will be the message returned by lua_pcall.

Typically, the error handler function is used to add more debug information to the error message, such as a stack traceback. Such information cannot be gathered after the return of lua_pcall, since by then the stack has unwound.

The lua_pcall function returns 0 in case of success or one of the following error codes (defined in lua.h):

3.16 - Defining C Functions

Lua can be extended with functions written in C. These functions must be of type lua_CFunction, which is defined as

       typedef int (*lua_CFunction) (lua_State *L);
A C function receives a Lua state and returns an integer, the number of values it wants to return to Lua.

In order to communicate properly with Lua, a C function must follow the following protocol, which defines the way parameters and results are passed: A C function receives its arguments from Lua in its stack in direct order (the first argument is pushed first). So, when the function starts, its first argument (if any) is at index 1. To return values to Lua, a C function just pushes them onto the stack, in direct order (the first result is pushed first), and returns the number of results. Any other value in the stack below the results will be properly discharged by Lua. Like a Lua function, a C function called by Lua can also return many results.

As an example, the following function receives a variable number of numerical arguments and returns their average and sum:

       static int foo (lua_State *L) {
         int n = lua_gettop(L);    /* number of arguments */
         lua_Number sum = 0;
         int i;
         for (i = 1; i <= n; i++) {
           if (!lua_isnumber(L, i)) {
             lua_pushstring(L, "incorrect argument to function `average'");
             lua_error(L);
           }
           sum += lua_tonumber(L, i);
         }
         lua_pushnumber(L, sum/n);        /* first result */
         lua_pushnumber(L, sum);         /* second result */
         return 2;                   /* number of results */
       }

To register a C function to Lua, there is the following convenience macro:

       #define lua_register(L,n,f) \
               (lua_pushstring(L, n), \
                lua_pushcfunction(L, f), \
                lua_settable(L, LUA_GLOBALSINDEX))
     /* lua_State *L;    */
     /* const char *n;   */
     /* lua_CFunction f; */
which receives the name the function will have in Lua and a pointer to the function. Thus, the C function foo above may be registered in Lua as average by calling
       lua_register(L, "average", foo);

3.17 - Defining C Closures

When a C function is created, it is possible to associate some values with it, thus creating a C closure; these values are then accessible to the function whenever it is called. To associate values with a C function, first these values should be pushed onto the stack (when there are multiple values, the first value is pushed first). Then the function

       void lua_pushcclosure (lua_State *L, lua_CFunction fn, int n);
is used to push the C function onto the stack, with the argument n telling how many values should be associated with the function (lua_pushcclosure also pops these values from the stack); in fact, the macro lua_pushcfunction is defined as lua_pushcclosure with n set to 0.

Then, whenever the C function is called, those values are located at specific pseudo-indices. Those pseudo-indices are produced by a macro lua_upvalueindex. The first value associated with a function is at position lua_upvalueindex(1), and so on. Any access to lua_upvalueindex(n), where n is greater than the number of upvalues of the current function, produces an acceptable (but invalid) index.

For examples of C functions and closures, see the standard libraries in the official Lua distribution (src/lib/*.c).

3.18 - Registry

Lua provides a registry, a pre-defined table that can be used by any C code to store whatever Lua value it needs to store, specially if the C code needs to keep that Lua value outside the life span of a C function. This table is always located at pseudo-index LUA_REGISTRYINDEX. Any C library can store data into this table, as long as it chooses keys different from other libraries. Typically, you should use as key a string containing your library name or a light userdata with the address of a C object in your code.

The integer keys in the registry are used by the reference mechanism, implemented by the auxiliary library, and therefore should not be used by other purposes.

3.19 - Error Handling in C

Internally, Lua uses the C longjmp facility to handle errors. When Lua faces any error (such as memory allocation errors, type errors, syntax errors) it raises an error, that is, it does a long jump. A protected environment uses setjmp to set a recover point; any error jumps to the most recent active recover point.

If an error happens outside any protected environment, Lua calls a panic function and then calls exit(EXIT_FAILURE). You can change the panic function with

       lua_CFunction lua_atpanic (lua_State *L, lua_CFunction panicf);
Your new panic function may avoid the application exit by never returning (e.g., by doing a long jump). Nevertheless, the corresponding Lua state will not be consistent; the only safe operation with it is to close it.

Almost any function in the API may raise an error, for instance due to a memory allocation error. The following functions run in protected mode (that is, they create a protected environment to run), so they never raise an error: lua_open, lua_close, lua_load, and lua_pcall.

There is yet another function that runs a given C function in protected mode:

       int lua_cpcall (lua_State *L, lua_CFunction func, void *ud);
lua_cpcall calls func in protected mode. func starts with only one element in its stack, a light userdata containing ud. In case of errors, lua_cpcall returns the same error codes as lua_pcall (see 3.15), plus the error object on the top of the stack; otherwise, it returns zero, and does not change the stack. Any value returned by func is discarded.

C code can generate a Lua error calling the function

       void lua_error (lua_State *L);
The error message (which actually can be any type of object) must be on the stack top. This function does a long jump, and therefore never returns.

3.20 - Threads

Lua offers partial support for multiple threads of execution. If you have a C library that offers multi-threading, then Lua can cooperate with it to implement the equivalent facility in Lua. Also, Lua implements its own coroutine system on top of threads. The following function creates a new thread in Lua:

       lua_State *lua_newthread (lua_State *L);
This function pushes the thread on the stack and returns a pointer to a lua_State that represents this new thread. The new state returned by this function shares with the original state all global objects (such as tables), but has an independent run-time stack.

Each thread has an independent global environment table. When you create a thread, this table is the same as that of the given state, but you can change each one independently.

There is no explicit function to close or to destroy a thread. Threads are subject to garbage collection, like any Lua object.

To manipulate threads as coroutines, Lua offers the following functions:

       int lua_resume (lua_State *L, int narg);
       int lua_yield  (lua_State *L, int nresults);
To start a coroutine, you first create a new thread; then you push on its stack the body function plus any eventual arguments; then you call lua_resume, with narg being the number of arguments. This call returns when the coroutine suspends or finishes its execution. When it returns, the stack contains all values passed to lua_yield, or all values returned by the body function. lua_resume returns 0 if there are no errors running the coroutine, or an error code (see 3.15). In case of errors, the stack contains only the error message. To restart a coroutine, you put on its stack only the values to be passed as results from yield, and then call lua_resume.

The lua_yield function can only be called as the return expression of a C function, as follows:

       return lua_yield (L, nresults);
When a C function calls lua_yield in that way, the running coroutine suspends its execution, and the call to lua_resume that started this coroutine returns. The parameter nresults is the number of values from the stack that are passed as results to lua_resume.

To exchange values between different threads, you may use lua_xmove:

       void lua_xmove (lua_State *from, lua_State *to, int n);
It pops n values from the stack from, and puhses them into the stack to.

4 - The Debug Interface

Lua has no built-in debugging facilities. Instead, it offers a special interface by means of functions and hooks. This interface allows the construction of different kinds of debuggers, profilers, and other tools that need "inside information" from the interpreter.

4.1 - Stack and Function Information

The main function to get information about the interpreter runtime stack is

       int lua_getstack (lua_State *L, int level, lua_Debug *ar);
This function fills parts of a lua_Debug structure with an identification of the activation record of the function executing at a given level. Level 0 is the current running function, whereas level n+1 is the function that has called level n. When there are no errors, lua_getstack returns 1; when called with a level greater than the stack depth, it returns 0.

The structure lua_Debug is used to carry different pieces of information about an active function:

      typedef struct lua_Debug {
        int event;
        const char *name;      /* (n) */
        const char *namewhat;  /* (n) `global', `local', `field', `method' */
        const char *what;      /* (S) `Lua' function, `C' function, Lua `main' */
        const char *source;    /* (S) */
        int currentline;       /* (l) */
        int nups;              /* (u) number of upvalues */
        int linedefined;       /* (S) */
        char short_src[LUA_IDSIZE]; /* (S) */

        /* private part */
        ...
      } lua_Debug;
lua_getstack fills only the private part of this structure, for later use. To fill the other fields of lua_Debug with useful information, call
       int lua_getinfo (lua_State *L, const char *what, lua_Debug *ar);
This function returns 0 on error (for instance, an invalid option in what). Each character in the string what selects some fields of the structure ar to be filled, as indicated by the letter in parentheses in the definition of lua_Debug above: `S´ fills in the fields source, linedefined, and what; `l´ fills in the field currentline, etc. Moreover, `f´ pushes onto the stack the function that is running at the given level.

To get information about a function that is not active (that is, not in the stack), you push it onto the stack and start the what string with the character `>´. For instance, to know in which line a function f was defined, you can write

       lua_Debug ar;
       lua_pushstring(L, "f");
       lua_gettable(L, LUA_GLOBALSINDEX);  /* get global `f' */
       lua_getinfo(L, ">S", &ar);
       printf("%d\n", ar.linedefined);
The fields of lua_Debug have the following meaning:

4.2 - Manipulating Local Variables and Upvalues

For the manipulation of local variables and upvalues, the debug interface uses indices: The first parameter or local variable has index 1, and so on, until the last active local variable. Upvalues have no particular order, as they are active through the whole function.

The following functions allow the manipulation of the local variables of a given activation record:

       const char *lua_getlocal (lua_State *L, const lua_Debug *ar, int n);
       const char *lua_setlocal (lua_State *L, const lua_Debug *ar, int n);
The parameter ar must be a valid activation record that was filled by a previous call to lua_getstack or given as argument to a hook (see 4.3). lua_getlocal gets the index n of a local variable, pushes the variable's value onto the stack, and returns its name. lua_setlocal assigns the value at the top of the stack to the variable and returns its name. Both functions return NULL when the index is greater than the number of active local variables.

The following functions allow the manipulation of the upvalues of a given function (unlike local variables, the upvalues of a function are accessible even when the function is not active):

       const char *lua_getupvalue (lua_State *L, int funcindex, int n);
       const char *lua_setupvalue (lua_State *L, int funcindex, int n);
These functions operate both on Lua functions and on C functions. (For Lua functions, upvalues are the external local variables that the function uses, and that consequently are included in its closure.) funcindex points to a function in the stack. lua_getpuvalue gets the index n of an upvalue, pushes the upvalue's value onto the stack, and returns its name. lua_setupvalue assigns the value at the top of the stack to the upvalue and returns its name. Both functions return NULL when the index is greater than the number of upvalues. For C functions, these functions use the empty string "" as a name for all upvalues.

As an example, the following function lists the names of all local variables and upvalues for a function at a given level of the stack:

       int listvars (lua_State *L, int level) {
         lua_Debug ar;
         int i;
         const char *name;
         if (lua_getstack(L, level, &ar) == 0)
           return 0;  /* failure: no such level in the stack */
         i = 1;
         while ((name = lua_getlocal(L, &ar, i++)) != NULL) {
           printf("local %d %s\n", i-1, name);
           lua_pop(L, 1);  /* remove variable value */
         }
         lua_getinfo(L, "f", &ar);  /* retrieves function */
         i = 1;
         while ((name = lua_getpuvalue(L, -1, i++)) != NULL) {
           printf("upvalue %d %s\n", i-1, name);
           lua_pop(L, 1);  /* remove upvalue value */
         }
         return 1;
       }

4.3 - Hooks

Lua offers a mechanism of hooks, which are user-defined C functions that are called during the program execution. A hook may be called in four different events: a call event, when Lua calls a function; a return event, when Lua returns from a function; a line event, when Lua starts executing a new line of code; and a count event, which happens every "count" instructions. Lua identifies these events with the following constants: LUA_HOOKCALL, LUA_HOOKRET (or LUA_HOOKTAILRET, see below), LUA_HOOKLINE, and LUA_HOOKCOUNT.

A hook has type lua_Hook, defined as follows:

       typedef void (*lua_Hook) (lua_State *L, lua_Debug *ar);
You can set the hook with the following function:
       int lua_sethook (lua_State *L, lua_Hook func, int mask, int count);
func is the hook. mask specifies on which events the hook will be called: It is formed by a disjunction of the constants LUA_MASKCALL, LUA_MASKRET, LUA_MASKLINE, and LUA_MASKCOUNT. The count argument is only meaningful when the mask includes LUA_MASKCOUNT. For each event, the hook is called as explained below:

A hook is disabled by setting mask to zero.

You can get the current hook, the current mask, and the current count with the next functions:

       lua_Hook lua_gethook      (lua_State *L);
       int      lua_gethookmask  (lua_State *L);
       int      lua_gethookcount (lua_State *L);

Whenever a hook is called, its ar argument has its field event set to the specific event that triggered the hook. Moreover, for line events, the field currentline is also set. To get the value of any other field in ar, the hook must call lua_getinfo. For return events, event may be LUA_HOOKRET, the normal value, or LUA_HOOKTAILRET. In the latter case, Lua is simulating a return from a function that did a tail call; in this case, it is useless to call lua_getinfo.

While Lua is running a hook, it disables other calls to hooks. Therefore, if a hook calls back Lua to execute a function or a chunk, that execution occurs without any calls to hooks.

5 - Standard Libraries

The standard libraries provide useful functions that are implemented directly through the C API. Some of these functions provide essential services to the language (e.g., type and getmetatable); others provide access to "outside" services (e.g., I/O); and others could be implemented in Lua itself, but are quite useful or have critical performance to deserve an implementation in C (e.g., sort).

All libraries are implemented through the official C API and are provided as separate C modules. Currently, Lua has the following standard libraries:

Except for the basic library, each library provides all its functions as fields of a global table or as methods of its objects.

To have access to these libraries, the C host program must first call the functions luaopen_base (for the basic library), luaopen_string (for the string library), luaopen_table (for the table library), luaopen_math (for the mathematical library), luaopen_io (for the I/O and the Operating System libraries), and luaopen_debug (for the debug library). These functions are declared in lualib.h.

5.1 - Basic Functions

The basic library provides some core functions to Lua. If you do not include this library in your application, you should check carefully whether you need to provide some alternative implementation for some of its facilities.

assert (v [, message])

Issues an error when the value of its argument v is nil or false; otherwise, returns this value. message is an error message; when absent, it defaults to "assertion failed!"

collectgarbage ([limit])

Sets the garbage-collection threshold to the given limit (in Kbytes) and checks it against the byte counter. If the new threshold is smaller than the byte counter, then Lua immediately runs the garbage collector (see 2.9). If limit is absent, it defaults to zero (thus forcing a garbage-collection cycle).

dofile (filename)

Opens the named file and executes its contents as a Lua chunk. When called without arguments, dofile executes the contents of the standard input (stdin). Returns any value returned by the chunk. In case of errors, dofile propagates the error to its caller (that is, it does not run in protected mode).

error (message [, level])

Terminates the last protected function called and returns message as the error message. Function error never returns.

The level argument specifies where the error message points the error. With level 1 (the default), the error position is where the error function was called. Level 2 points the error to where the function that called error was called; and so on.

_G

A global variable (not a function) that holds the global environment (that is, _G._G = _G). Lua itself does not use this variable; changing its value does not affect any environment. (Use setfenv to change environments.)

getfenv (f)

Returns the current environment in use by the function. f can be a Lua function or a number, which specifies the function at that stack level: Level 1 is the function calling getfenv. If the given function is not a Lua function, or if f is 0, getfenv returns the global environment. The default for f is 1.

If the environment has a "__fenv" field, returns the associated value, instead of the environment.

getmetatable (object)

If the object does not have a metatable, returns nil. Otherwise, if the object's metatable has a "__metatable" field, returns the associated value. Otherwise, returns the metatable of the given object.

gcinfo ()

Returns two results: the number of Kbytes of dynamic memory that Lua is using and the current garbage collector threshold (also in Kbytes).

ipairs (t)

Returns an iterator function, the table t, and 0, so that the construction

       for i,v in ipairs(t) do ... end
will iterate over the pairs (1,t[1]), (2,t[2]), ..., up to the first integer key with a nil value in the table.

loadfile (filename)

Loads a file as a Lua chunk (without running it). If there are no errors, returns the compiled chunk as a function; otherwise, returns nil plus the error message. The environment of the returned function is the global environment.

loadlib (libname, funcname)

Links the program with the dynamic C library libname. Inside this library, looks for a function funcname and returns this function as a C function.

libname must be the complete file name of the C library, including any eventual path and extension.

This function is not supported by ANSI C. As such, it is only available on some platforms (Windows, Linux, Solaris, BSD, plus other Unix systems that support the dlfcn standard).

loadstring (string [, chunkname])

Loads a string as a Lua chunk (without running it). If there are no errors, returns the compiled chunk as a function; otherwise, returns nil plus the error message. The environment of the returned function is the global environment.

The optional parameter chunkname is the name to be used in error messages and debug information.

To load and run a given string, use the idiom

      assert(loadstring(s))()

next (table [, index])

Allows a program to traverse all fields of a table. Its first argument is a table and its second argument is an index in this table. next returns the next index of the table and the value associated with the index. When called with nil as its second argument, next returns the first index of the table and its associated value. When called with the last index, or with nil in an empty table, next returns nil. If the second argument is absent, then it is interpreted as nil.

Lua has no declaration of fields; There is no difference between a field not present in a table or a field with value nil. Therefore, next only considers fields with non-nil values. The order in which the indices are enumerated is not specified, even for numeric indices. (To traverse a table in numeric order, use a numerical for or the ipairs function.)

The behavior of next is undefined if, during the traversal, you assign any value to a non-existent field in the table.

pairs (t)

Returns the next function and the table t (plus a nil), so that the construction

       for k,v in pairs(t) do ... end
will iterate over all key-value pairs of table t.

pcall (f, arg1, arg2, ...)

Calls function f with the given arguments in protected mode. That means that any error inside f is not propagated; instead, pcall catches the error and returns a status code. Its first result is the status code (a boolean), which is true if the call succeeds without errors. In such case, pcall also returns all results from the call, after this first result. In case of any error, pcall returns false plus the error message.

print (e1, e2, ...)

Receives any number of arguments, and prints their values in stdout, using the tostring function to convert them to strings. This function is not intended for formatted output, but only as a quick way to show a value, typically for debugging. For formatted output, use format (see 5.3).

rawequal (v1, v2)

Checks whether v1 is equal to v2, without invoking any metamethod. Returns a boolean.

rawget (table, index)

Gets the real value of table[index], without invoking any metamethod. table must be a table; index is any value different from nil.

rawset (table, index, value)

Sets the real value of table[index] to value, without invoking any metamethod. table must be a table, index is any value different from nil, and value is any Lua value.

require (packagename)

Loads the given package. The function starts by looking into the table _LOADED to determine whether packagename is already loaded. If it is, then require returns the value that the package returned when it was first loaded. Otherwise, it searches a path looking for a file to load.

If the global variable LUA_PATH is a string, this string is the path. Otherwise, require tries the environment variable LUA_PATH. As a last resort, it uses the predefined path "?;?.lua".

The path is a sequence of templates separated by semicolons. For each template, require will change each interrogation mark in the template to packagename, and then will try to load the resulting file name. So, for instance, if the path is

  "./?.lua;./?.lc;/usr/local/?/?.lua;/lasttry"
a require "mod" will try to load the files ./mod.lua, ./mod.lc, /usr/local/mod/mod.lua, and /lasttry, in that order.

The function stops the search as soon as it can load a file, and then it runs the file. After that, it associates, in table _LOADED, the package name with the value that the package returned, and returns that value. If the package returns nil (or no value), require converts this value to true. If the package returns false, require also returns false. However, as the mark in table _LOADED is false, any new attempt to reload the file will happen as if the package was not loaded (that is, the package will be loaded again).

If there is any error loading or running the file, or if it cannot find any file in the path, then require signals an error.

While running a file, require defines the global variable _REQUIREDNAME with the package name. The package being loaded always runs within the global environment.

setfenv (f, table)

Sets the current environment to be used by the given function. f can be a Lua function or a number, which specifies the function at that stack level: Level 1 is the function calling setfenv.

As a special case, when f is 0 setfenv changes the global environment of the running thread.

If the original environment has a "__fenv" field, setfenv raises an error.

setmetatable (table, metatable)

Sets the metatable for the given table. (You cannot change the metatable of a userdata from Lua.) If metatable is nil, removes the metatable of the given table. If the original metatable has a "__metatable" field, raises an error.

tonumber (e [, base])

Tries to convert its argument to a number. If the argument is already a number or a string convertible to a number, then tonumber returns that number; otherwise, it returns nil.

An optional argument specifies the base to interpret the numeral. The base may be any integer between 2 and 36, inclusive. In bases above 10, the letter `A´ (in either upper or lower case) represents 10, `B´ represents 11, and so forth, with `Z´ representing 35. In base 10 (the default), the number may have a decimal part, as well as an optional exponent part (see 2.2.1). In other bases, only unsigned integers are accepted.

tostring (e)

Receives an argument of any type and converts it to a string in a reasonable format. For complete control of how numbers are converted, use format (see 5.3).

If the metatable of e has a "__tostring" field, tostring calls the corresponding value with e as argument, and uses the result of the call as its result.

type (v)

Returns the type of its only argument, coded as a string. The possible results of this function are "nil" (a string, not the value nil), "number", "string", "boolean, "table", "function", "thread", and "userdata".

unpack (list)

Returns all elements from the given list. This function is equivalent to
  return list[1], list[2], ..., list[n]
except that the above code can be written only for a fixed n. The number n is the size of the list, as defined for the table.getn function.

_VERSION

A global variable (not a function) that holds a string containing the current interpreter version. The current content of this string is "Lua 5.0".

xpcall (f, err)

This function is similar to pcall, except that you can set a new error handler.

xpcall calls function f in protected mode, using err as the error handler. Any error inside f is not propagated; instead, xpcall catches the error, calls the err function with the original error object, and returns a status code. Its first result is the status code (a boolean), which is true if the call succeeds without errors. In such case, xpcall also returns all results from the call, after this first result. In case of any error, xpcall returns false plus the result from err.

5.2 - Coroutine Manipulation

The operations related to coroutines comprise a sub-library of the basic library and come inside the table coroutine. See 2.10 for a general description of coroutines.

coroutine.create (f)

Creates a new coroutine, with body f. f must be a Lua function. Returns this new coroutine, an object with type "thread".

coroutine.resume (co, val1, ...)

Starts or continues the execution of coroutine co. The first time you resume a coroutine, it starts running its body. The arguments val1, ... go as the arguments to the body function. If the coroutine has yielded, resume restarts it; the arguments val1, ... go as the results from the yield.

If the coroutine runs without any errors, resume returns true plus any values passed to yield (if the coroutine yields) or any values returned by the body function (if the coroutine terminates). If there is any error, resume returns false plus the error message.

coroutine.status (co)

Returns the status of coroutine co, as a string: "running", if the coroutine is running (that is, it called status); "suspended", if the coroutine is suspended in a call to yield, or if it has not started running yet; and "dead" if the coroutine has finished its body function, or if it has stopped with an error.

coroutine.wrap (f)

Creates a new coroutine, with body f. f must be a Lua function. Returns a function that resumes the coroutine each time it is called. Any arguments passed to the function behave as the extra arguments to resume. Returns the same values returned by resume, except the first boolean. In case of error, propagates the error.

coroutine.yield (val1, ...)

Suspends the execution of the calling coroutine. The coroutine cannot be running neither a C function, nor a metamethod, nor an iterator. Any arguments to yield go as extra results to resume.

5.3 - String Manipulation

This library provides generic functions for string manipulation, such as finding and extracting substrings, and pattern matching. When indexing a string in Lua, the first character is at position 1 (not at 0, as in C). Indices are allowed to be negative and are interpreted as indexing backwards, from the end of the string. Thus, the last character is at position -1, and so on.

The string library provides all its functions inside the table string.

string.byte (s [, i])

Returns the internal numerical code of the i-th character of s, or nil if the index is out of range. If i is absent, then it is assumed to be 1. i may be negative.

Note that numerical codes are not necessarily portable across platforms.

string.char (i1, i2, ...)

Receives 0 or more integers. Returns a string with length equal to the number of arguments, in which each character has the internal numerical code equal to its correspondent argument.

Note that numerical codes are not necessarily portable across platforms.

string.dump (function)

Returns a binary representation of the given function, so that a later loadstring on that string returns a copy of the function. function must be a Lua function without upvalues.

string.find (s, pattern [, init [, plain]])

Looks for the first match of pattern in the string s. If it finds one, then find returns the indices of s where this occurrence starts and ends; otherwise, it returns nil. If the pattern specifies captures (see string.gsub below), the captured strings are returned as extra results. A third, optional numerical argument init specifies where to start the search; its default value is 1 and may be negative. A value of true as a fourth, optional argument plain turns off the pattern matching facilities, so the function does a plain "find substring" operation, with no characters in pattern being considered "magic". Note that if plain is given, then init must be given too.

string.len (s)

Receives a string and returns its length. The empty string "" has length 0. Embedded zeros are counted, so "a\000b\000c" has length 5.

string.lower (s)

Receives a string and returns a copy of that string with all uppercase letters changed to lowercase. All other characters are left unchanged. The definition of what is an uppercase letter depends on the current locale.

string.rep (s, n)

Returns a string that is the concatenation of n copies of the string s.

string.sub (s, i [, j])

Returns the substring of s that starts at i and continues until j; i and j may be negative. If j is absent, then it is assumed to be equal to -1 (which is the same as the string length). In particular, the call string.sub(s,1,j) returns a prefix of s with length j, and string.sub(s, -i) returns a suffix of s with length i.

string.upper (s)

Receives a string and returns a copy of that string with all lowercase letters changed to uppercase. All other characters are left unchanged. The definition of what is a lowercase letter depends on the current locale.

string.format (formatstring, e1, e2, ...)

Returns a formatted version of its variable number of arguments following the description given in its first argument (which must be a string). The format string follows the same rules as the printf family of standard C functions. The only differences are that the options/modifiers *, l, L, n, p, and h are not supported, and there is an extra option, q. The q option formats a string in a form suitable to be safely read back by the Lua interpreter: The string is written between double quotes, and all double quotes, newlines, and backslashes in the string are correctly escaped when written. For instance, the call
       string.format('%q', 'a string with "quotes" and \n new line')
will produce the string:
"a string with \"quotes\" and \
 new line"

The options c, d, E, e, f, g, G, i, o, u, X, and x all expect a number as argument, whereas q and s expect a string. The * modifier can be simulated by building the appropriate format string. For example, "%*g" can be simulated with "%"..width.."g".

String values to be formatted with %s cannot contain embedded zeros.

string.gfind (s, pat)

Returns an iterator function that, each time it is called, returns the next captures from pattern pat over string s.

If pat specifies no captures, then the whole match is produced in each call.

As an example, the following loop

  s = "hello world from Lua"
  for w in string.gfind(s, "%a+") do
    print(w)
  end
will iterate over all the words from string s, printing one per line. The next example collects all pairs key=value from the given string into a table:
  t = {}
  s = "from=world, to=Lua"
  for k, v in string.gfind(s, "(%w+)=(%w+)") do
    t[k] = v
  end

string.gsub (s, pat, repl [, n])

Returns a copy of s in which all occurrences of the pattern pat have been replaced by a replacement string specified by repl. gsub also returns, as a second value, the total number of substitutions made.

If repl is a string, then its value is used for replacement. Any sequence in repl of the form %n, with n between 1 and 9, stands for the value of the n-th captured substring (see below).

If repl is a function, then this function is called every time a match occurs, with all captured substrings passed as arguments, in order; if the pattern specifies no captures, then the whole match is passed as a sole argument. If the value returned by this function is a string, then it is used as the replacement string; otherwise, the replacement string is the empty string.

The optional last parameter n limits the maximum number of substitutions to occur. For instance, when n is 1 only the first occurrence of pat is replaced.

Here are some examples:

   x = string.gsub("hello world", "(%w+)", "%1 %1")
   --> x="hello hello world world"

   x = string.gsub("hello world", "(%w+)", "%1 %1", 1)
   --> x="hello hello world"

   x = string.gsub("hello world from Lua", "(%w+)%s*(%w+)", "%2 %1")
   --> x="world hello Lua from"

   x = string.gsub("home = $HOME, user = $USER", "%$(%w+)", os.getenv)
   --> x="home = /home/roberto, user = roberto"

   x = string.gsub("4+5 = $return 4+5$", "%$(.-)%$", function (s)
         return loadstring(s)()
       end)
   --> x="4+5 = 9"

   local t = {name="lua", version="5.0"}
   x = string.gsub("$name_$version.tar.gz", "%$(%w+)", function (v)
         return t[v]
       end)
   --> x="lua_5.0.tar.gz"

Patterns

A character class is used to represent a set of characters. The following combinations are allowed in describing a character class:

For all classes represented by single letters (%a, %c, etc.), the corresponding uppercase letter represents the complement of the class. For instance, %S represents all non-space characters.

The definitions of letter, space, and other character groups depend on the current locale. In particular, the class [a-z] may not be equivalent to %l. The second form should be preferred for portability.

A pattern item may be

A pattern is a sequence of pattern items. A `^´ at the beginning of a pattern anchors the match at the beginning of the subject string. A `$´ at the end of a pattern anchors the match at the end of the subject string. At other positions, `^´ and `$´ have no special meaning and represent themselves.

A pattern may contain sub-patterns enclosed in parentheses; they describe captures. When a match succeeds, the substrings of the subject string that match captures are stored (captured) for future use. Captures are numbered according to their left parentheses. For instance, in the pattern "(a*(.)%w(%s*))", the part of the string matching "a*(.)%w(%s*)" is stored as the first capture (and therefore has number 1); the character matching . is captured with number 2, and the part matching %s* has number 3.

As a special case, the empty capture () captures the current string position (a number). For instance, if we apply the pattern "()aa()" on the string "flaaap", there will be two captures: 3 and 5.

A pattern cannot contain embedded zeros. Use %z instead.

5.4 - Table Manipulation

This library provides generic functions for table manipulation. It provides all its functions inside the table table.

Most functions in the table library assume that the table represents an array or a list. For those functions, an important concept is the size of the array. There are three ways to specify that size:

For more details, see the descriptions of the table.getn and table.setn functions.

table.concat (table [, sep [, i [, j]]])

Returns table[i]..sep..table[i+1] ... sep..table[j]. The default value for sep is the empty string, the default for i is 1, and the default for j is the size of the table. If i is greater than j, returns the empty string.

table.foreach (table, f)

Executes the given f over all elements of table. For each element, f is called with the index and respective value as arguments. If f returns a non-nil value, then the loop is broken, and this value is returned as the final value of foreach.

See the next function for extra information about table traversals.

table.foreachi (table, f)

Executes the given f over the numerical indices of table. For each index, f is called with the index and respective value as arguments. Indices are visited in sequential order, from 1 to n, where n is the size of the table (see 5.4). If f returns a non-nil value, then the loop is broken and this value is returned as the result of foreachi.

table.getn (table)

Returns the size of a table, when seen as a list. If the table has an n field with a numeric value, this value is the size of the table. Otherwise, if there was a previous call to table.setn over this table, the respective value is returned. Otherwise, the size is one less the first integer index with a nil value.

table.sort (table [, comp])

Sorts table elements in a given order, in-place, from table[1] to table[n], where n is the size of the table (see 5.4). If comp is given, then it must be a function that receives two table elements, and returns true when the first is less than the second (so that not comp(a[i+1],a[i]) will be true after the sort). If comp is not given, then the standard Lua operator < is used instead.

The sort algorithm is not stable, that is, elements considered equal by the given order may have their relative positions changed by the sort.

table.insert (table, [pos,] value)

Inserts element value at position pos in table, shifting up other elements to open space, if necessary. The default value for pos is n+1, where n is the size of the table (see 5.4), so that a call table.insert(t,x) inserts x at the end of table t. This function also updates the size of the table by calling table.setn(table, n+1).

table.remove (table [, pos])

Removes from table the element at position pos, shifting down other elements to close the space, if necessary. Returns the value of the removed element. The default value for pos is n, where n is the size of the table (see 5.4), so that a call table.remove(t) removes the last element of table t. This function also updates the size of the table by calling table.setn(table, n-1).

table.setn (table, n)

Updates the size of a table. If the table has a field "n" with a numerical value, that value is changed to the given n. Otherwise, it updates an internal state so that subsequent calls to table.getn(table) return n.

5.5 - Mathematical Functions

This library is an interface to most of the functions of the standard C math library. (Some have slightly different names.) It provides all its functions inside the table math. In addition, it registers the global __pow for the binary exponentiation operator ^, so that x^y returns xy. The library provides the following functions:

       math.abs     math.acos    math.asin    math.atan    math.atan2
       math.ceil    math.cos     math.deg     math.exp     math.floor
       math.log     math.log10   math.max     math.min     math.mod
       math.pow     math.rad     math.sin     math.sqrt    math.tan
       math.frexp   math.ldexp   math.random  math.randomseed
plus a variable math.pi. Most of them are only interfaces to the corresponding functions in the C library. All trigonometric functions work in radians (previous versions of Lua used degrees). The functions math.deg and math.rad convert between radians and degrees.

The function math.max returns the maximum value of its numeric arguments. Similarly, math.min computes the minimum. Both can be used with 1, 2, or more arguments.

The functions math.random and math.randomseed are interfaces to the simple random generator functions rand and srand that are provided by ANSI C. (No guarantees can be given for their statistical properties.) When called without arguments, math.random returns a pseudo-random real number in the range [0,1). When called with a number n, math.random returns a pseudo-random integer in the range [1,n]. When called with two arguments, l and u, math.random returns a pseudo-random integer in the range [l,u]. The math.randomseed function sets a "seed" for the pseudo-random generator: Equal seeds produce equal sequences of numbers.

5.6 - Input and Output Facilities

The I/O library provides two different styles for file manipulation. The first one uses implicit file descriptors, that is, there are operations to set a default input file and a default output file, and all input/output operations are over those default files. The second style uses explicit file descriptors.

When using implicit file descriptors, all operations are supplied by table io. When using explicit file descriptors, the operation io.open returns a file descriptor and then all operations are supplied as methods by the file descriptor.

The table io also provides three predefined file descriptors with their usual meanings from C: io.stdin, io.stdout, and io.stderr.

A file handle is a userdata containing the file stream (FILE*), with a distinctive metatable created by the I/O library.

Unless otherwise stated, all I/O functions return nil on failure (plus an error message as a second result) and some value different from nil on success.

io.close ([file])

Equivalent to file:close(). Without a file, closes the default output file.

io.flush ()

Equivalent to file:flush over the default output file.

io.input ([file])

When called with a file name, it opens the named file (in text mode), and sets its handle as the default input file. When called with a file handle, it simply sets that file handle as the default input file. When called without parameters, it returns the current default input file.

In case of errors this function raises the error, instead of returning an error code.

io.lines ([filename])

Opens the given file name in read mode and returns an iterator function that, each time it is called, returns a new line from the file. Therefore, the construction

       for line in io.lines(filename) do ... end
will iterate over all lines of the file. When the iterator function detects the end of file, it returns nil (to finish the loop) and automatically closes the file.

The call io.lines() (without a file name) is equivalent to io.input():lines(), that is, it iterates over the lines of the default input file.

io.open (filename [, mode])

This function opens a file, in the mode specified in the string mode. It returns a new file handle, or, in case of errors, nil plus an error message.

The mode string can be any of the following:

The mode string may also have a b at the end, which is needed in some systems to open the file in binary mode. This string is exactly what is used in the standard C function fopen.

io.output ([file])

Similar to io.input, but operates over the default output file.

io.read (format1, ...)

Equivalent to io.input():read.

io.tmpfile ()

Returns a handle for a temporary file. This file is open in update mode and it is automatically removed when the program ends.

io.type (obj)

Checks whether obj is a valid file handle. Returns the string "file" if obj is an open file handle, "closed file" if obj is a closed file handle, and nil if obj is not a file handle.

io.write (value1, ...)

Equivalent to io.output():write.

file:close ()

Closes file.

file:flush ()

Saves any written data to file.

file:lines ()

Returns an iterator function that, each time it is called, returns a new line from the file. Therefore, the construction

       for line in file:lines() do ... end
will iterate over all lines of the file. (Unlike io.lines, this function does not close the file when the loop ends.)

file:read (format1, ...)

Reads the file file, according to the given formats, which specify what to read. For each format, the function returns a string (or a number) with the characters read, or nil if it cannot read data with the specified format. When called without formats, it uses a default format that reads the entire next line (see below).

The available formats are

file:seek ([whence] [, offset])

Sets and gets the file position, measured from the beginning of the file, to the position given by offset plus a base specified by the string whence, as follows:

In case of success, function seek returns the final file position, measured in bytes from the beginning of the file. If this function fails, it returns nil, plus a string describing the error.

The default value for whence is "cur", and for offset is 0. Therefore, the call file:seek() returns the current file position, without changing it; the call file:seek("set") sets the position to the beginning of the file (and returns 0); and the call file:seek("end") sets the position to the end of the file, and returns its size.

file:write (value1, ...)

Writes the value of each of its arguments to the filehandle file. The arguments must be strings or numbers. To write other values, use tostring or string.format before write.

5.7 - Operating System Facilities

This library is implemented through table os.

os.clock ()

Returns an approximation of the amount of CPU time used by the program, in seconds.

os.date ([format [, time]])

Returns a string or a table containing date and time, formatted according to the given string format.

If the time argument is present, this is the time to be formatted (see the os.time function for a description of this value). Otherwise, date formats the current time.

If format starts with `!´, then the date is formatted in Coordinated Universal Time. After that optional character, if format is *t, then date returns a table with the following fields: year (four digits), month (1--12), day (1--31), hour (0--23), min (0--59), sec (0--61), wday (weekday, Sunday is 1), yday (day of the year), and isdst (daylight saving flag, a boolean).

If format is not *t, then date returns the date as a string, formatted according with the same rules as the C function strftime.

When called without arguments, date returns a reasonable date and time representation that depends on the host system and on the current locale (that is, os.date() is equivalent to os.date("%c")).

os.difftime (t2, t1)

Returns the number of seconds from time t1 to time t2. In Posix, Windows, and some other systems, this value is exactly t2-t1.

os.execute (command)

This function is equivalent to the C function system. It passes command to be executed by an operating system shell. It returns a status code, which is system-dependent.

os.exit ([code])

Calls the C function exit, with an optional code, to terminate the host program. The default value for code is the success code.

os.getenv (varname)

Returns the value of the process environment variable varname, or nil if the variable is not defined.

os.remove (filename)

Deletes the file with the given name. If this function fails, it returns nil, plus a string describing the error.

os.rename (oldname, newname)

Renames file named oldname to newname. If this function fails, it returns nil, plus a string describing the error.

os.setlocale (locale [, category])

Sets the current locale of the program. locale is a string specifying a locale; category is an optional string describing which category to change: "all", "collate", "ctype", "monetary", "numeric", or "time"; the default category is "all". The function returns the name of the new locale, or nil if the request cannot be honored.

os.time ([table])

Returns the current time when called without arguments, or a time representing the date and time specified by the given table. This table must have fields year, month, and day, and may have fields hour, min, sec, and isdst (for a description of these fields, see the os.date function).

The returned value is a number, whose meaning depends on your system. In Posix, Windows, and some other systems, this number counts the number of seconds since some given start time (the "epoch"). In other systems, the meaning is not specified, and the number returned by time can be used only as an argument to date and difftime.

os.tmpname ()

Returns a string with a file name that can be used for a temporary file. The file must be explicitly opened before its use and removed when no longer needed.

This function is equivalent to the tmpnam C function, and many people (and even some compilers!) advise against its use, because between the time you call this function and the time you open the file, it is possible for another process to create a file with the same name.

5.8 - The Reflexive Debug Interface

The debug library provides the functionality of the debug interface to Lua programs. You should exert care when using this library. The functions provided here should be used exclusively for debugging and similar tasks, such as profiling. Please resist the temptation to use them as a usual programming tool: They can be very slow. Moreover, setlocal and getlocal violate the privacy of local variables and therefore can compromise some otherwise secure code.

All functions in this library are provided inside a debug table.

debug.debug ()

Enters an interactive mode with the user, running each string that the user enters. Using simple commands and other debug facilities, the user can inspect global and local variables, change their values, evaluate expressions, and so on. A line containing only the word cont finishes this function, so that the caller continues its execution.

Note that commands for debug.debug are not lexically nested with any function, so they have no direct access to local variables.

debug.gethook ()

Returns the current hook settings, as three values: the current hook function, the current hook mask, and the current hook count (as set by the debug.sethook function).

debug.getinfo (function [, what])

This function returns a table with information about a function. You can give the function directly, or you can give a number as the value of function, which means the function running at level function of the call stack: Level 0 is the current function (getinfo itself); level 1 is the function that called getinfo; and so on. If function is a number larger than the number of active functions, then getinfo returns nil.

The returned table contains all the fields returned by lua_getinfo, with the string what describing which fields to fill in. The default for what is to get all information available. If present, the option `f´ adds a field named func with the function itself.

For instance, the expression debug.getinfo(1,"n").name returns the name of the current function, if a reasonable name can be found, and debug.getinfo(print) returns a table with all available information about the print function.

debug.getlocal (level, local)

This function returns the name and the value of the local variable with index local of the function at level level of the stack. (The first parameter or local variable has index 1, and so on, until the last active local variable.) The function returns nil if there is no local variable with the given index, and raises an error when called with a level out of range. (You can call debug.getinfo to check whether the level is valid.)

debug.getupvalue (func, up)

This function returns the name and the value of the upvalue with index up of the function func. The function returns nil if there is no upvalue with the given index.

debug.setlocal (level, local, value)

This function assigns the value value to the local variable with index local of the function at level level of the stack. The function returns nil if there is no local variable with the given index, and raises an error when called with a level out of range. (You can call getinfo to check whether the level is valid.)

debug.setupvalue (func, up, value)

This function assigns the value value to the upvalue with index up of the function func. The function returns nil if there is no upvalue with the given index.

debug.sethook (hook, mask [, count])

Sets the given function as a hook. The string mask and the number count describe when the hook will be called. The string mask may have the following characters, with the given meaning:

With a count different from zero, the hook is called after every count instructions.

When called without arguments, the debug.sethook function turns off the hook.

When the hook is called, its first parameter is always a string describing the event that triggered its call: "call", "return" (or "tail return"), "line", and "count". Moreover, for line events, it also gets as its second parameter the new line number. Inside a hook, you can call getinfo with level 2 to get more information about the running function (level 0 is the getinfo function, and level 1 is the hook function), unless the event is "tail return". In this case, Lua is only simulating the return, and a call to getinfo will return invalid data.

debug.traceback ([message])

Returns a string with a traceback of the call stack. An optional message string is appended at the beginning of the traceback. This function is typically used with xpcall to produce better error messages.

6 - Lua Stand-alone

Although Lua has been designed as an extension language, to be embedded in a host C program, it is also frequently used as a stand-alone language. An interpreter for Lua as a stand-alone language, called simply lua, is provided with the standard distribution. The stand-alone interpreter includes all standard libraries plus the reflexive debug interface. Its usage is:

      lua [options] [script [args]]
The options are: After handling its options, lua runs the given script, passing to it the given args. When called without arguments, lua behaves as lua -v -i when stdin is a terminal, and as lua - otherwise.

Before running any argument, the interpreter checks for an environment variable LUA_INIT. If its format is @filename, then lua executes the file. Otherwise, lua executes the string itself.

All options are handled in order, except -i. For instance, an invocation like

       $ lua -e'a=1' -e 'print(a)' script.lua
will first set a to 1, then print a, and finally run the file script.lua. (Here, $ is the shell prompt. Your prompt may be different.)

Before starting to run the script, lua collects all arguments in the command line in a global table called arg. The script name is stored in index 0, the first argument after the script name goes to index 1, and so on. The field n gets the number of arguments after the script name. Any arguments before the script name (that is, the interpreter name plus the options) go to negative indices. For instance, in the call

       $ lua -la.lua b.lua t1 t2
the interpreter first runs the file a.lua, then creates a table
       arg = { [-2] = "lua", [-1] = "-la.lua", [0] = "b.lua",
               [1] = "t1", [2] = "t2"; n = 2 }
and finally runs the file b.lua.

In interactive mode, if you write an incomplete statement, the interpreter waits for its completion.

If the global variable _PROMPT is defined as a string, then its value is used as the prompt. Therefore, the prompt can be changed directly on the command line:

       $ lua -e"_PROMPT='myprompt> '" -i
(the outer pair of quotes is for the shell, the inner is for Lua), or in any Lua programs by assigning to _PROMPT. Note the use of -i to enter interactive mode; otherwise, the program would end just after the assignment to _PROMPT.

In Unix systems, Lua scripts can be made into executable programs by using chmod +x and the #! form, as in

#!/usr/local/bin/lua
(Of course, the location of the Lua interpreter may be different in your machine. If lua is in your PATH, then
#!/usr/bin/env lua
is a more portable solution.)

Acknowledgments

The Lua team is grateful to Tecgraf for its continued support to Lua. We thank everyone at Tecgraf, specially the head of the group, Marcelo Gattass. At the risk of omitting several names, we also thank the following individuals for supporting, contributing to, and spreading the word about Lua: Alan Watson. André Clinio, André Costa, Antonio Scuri, Asko Kauppi, Bret Mogilefsky, Cameron Laird, Carlos Cassino, Carlos Henrique Levy, Claudio Terra, David Jeske, Ed Ferguson, Edgar Toernig, Erik Hougaard, Jim Mathies, John Belmonte, John Passaniti, John Roll, Jon Erickson, Jon Kleiser, Mark Ian Barlow, Nick Trout, Noemi Rodriguez, Norman Ramsey, Philippe Lhoste, Renata Ratton, Renato Borges, Renato Cerqueira, Reuben Thomas, Stephan Herrmann, Steve Dekorte, Thatcher Ulrich, Tomás Gorham, Vincent Penquerc'h. Thank you!


Incompatibilities with Previous Versions

Lua 5.0 is a major release. There are several incompatibilities with its previous version, Lua 4.0.

Incompatibilities with version 4.0

Changes in the Language

Changes in the Libraries

Changes in the API

The Complete Syntax of Lua


chunk ::= {stat [`;´]}

block ::= chunk

stat ::= varlist1 `=´ explist1 | functioncall | do block end | while exp do block end | repeat block until exp | if exp then block {elseif exp then block} [else block] end | return [explist1] | break | for Name `=´ exp `,´ exp [`,´ exp] do block end | for Name {`,´ Name} in explist1 do block end | function funcname funcbody | local function Name funcbody | local namelist [init]

funcname ::= Name {`.´ Name} [`:´ Name]

varlist1 ::= var {`,´ var}

var ::= Name | prefixexp `[´ exp `]´ | prefixexp `.´ Name

namelist ::= Name {`,´ Name}

init ::= `=´ explist1

explist1 ::= {exp `,´} exp

exp ::= nil | false | true | Number | Literal | function | prefixexp | tableconstructor | exp binop exp | unop exp

prefixexp ::= var | functioncall | `(´ exp `)´

functioncall ::= prefixexp args | prefixexp `:´ Name args

args ::= `(´ [explist1] `)´ | tableconstructor | Literal

function ::= function funcbody

funcbody ::= `(´ [parlist1] `)´ block end

parlist1 ::= Name {`,´ Name} [`,´ `...´] | `...´

tableconstructor ::= `{´ [fieldlist] `}´ fieldlist ::= field {fieldsep field} [fieldsep] field ::= `[´ exp `]´ `=´ exp | name `=´ exp | exp fieldsep ::= `,´ | `;´

binop ::= `+´ | `-´ | `*´ | `/´ | `^´ | `..´ | `<´ | `<=´ | `>´ | `>=´ | `==´ | `~=´ | and | or

unop ::= `-´ | not


Last update: Tue Nov 25 16:08:37 BRST 2003