Warning: this is an htmlized version!
The original is across this link,
and the conversion rules are here.
\input texinfo
@setfilename eev.info
@settitle Test
@c Generated by: (find-angg "TEXINFO/eev.texi.lua")
@c See:  http://angg.twu.net/TEXINFO/eev.texi.lua.html

@c (find-node "(texinfo)Installing Dir Entries")
@c (find-es "bash" "bash-3.1-info")
@c (find-es "bash" "bash-3.1-info" "sudo install-info")
@c (find-sh0 "sudo install-info --section Emacs Emacs ~/TEXINFO/eev.info")
@c (find-sh0 "cd; ls -lF {info,TEXINFO}/eev.info")

@dircategory Emacs
@direntry
* Eev: (eev).				How to automate almost everything.
@end direntry

@node Top, installation, (dir), (dir)
@comment  node-name,  next,  previous,  up
@top Top


@example
[See:]
(find-eevtexinode "sending commands")
@end example

@c «detailmenu»
@menu
* installation::                Installation
* introduction::                Introduction
* loose ends::                  Loose ends
* index::                       Index

@detailmenu
 --- The Detailed Node Listing ---

Introduction

* abstract::                    Abstract
* three interfaces::            Three kinds of interfaces
* one thing well::              ``Make each program do one thing well''
* making progs receive cmds::   Making programs receive commands
* sending commands::            Sending Commands
* hyperlinks::                  Hyperlinks
* shorter hyperlinks::          Shorter Hyperlinks
* forward and back::            Keys for following hyperlinks and for going back
* dangerous hyperlinks::        Dangerous hyperlinks
* generating hyperlinks::       Generating Hyperlinks
* returning::                   Returning from hyperlinks
* local copies::                Local copies of files from the internet
* rcfiles::                     rcfiles
* glyphs::                      Glyphs
* compose pairs::               Compose Pairs
* delimited regions::           Delimited regions
* communication channels::      Communication channels
* implementation of channels::  The Implementation of Communication Channels
* anchors::                     Anchors
* e-scripts::                   E-scripts
* splitting eev.el::            Splitting eev.el
* eesteps::                     eesteps
* eepitch::                     Sending lines to processes running in Emacs buffers
* eepitch and rcfiles::         Using eepitch to control unprepared shells
* eepitch-gud::                 Controlling debuggers with eepitch
* eepitch-gdb::                 E-scripting GDB with eepitch
* little debugging languages::  Two little languages for debugging
* inspecting data::             Inspecting data in running programs
* big modular e-scripts::       Big Modular E-scripts
* iskidip::                     Internet Skills for Disconnected People

Loose ends

* this document::               This document
* eev manifesto::               The eev manifesto
* dedication::                  Dedication
* eev-mode-map::                eev-mode-map
* alternative to customize::    A Lisp-ish alternative to customize
* running TeX::                 Running TeX
* ee-wrap::                     ee-wrap
* htmlizing::                   Htmlizing e-scripts

@end detailmenu
@end menu

@node installation, introduction, Top, Top
@comment  node-name,  next,  previous,  up
@chapter Installation


@example
[See:]
(find-eev "INSTALL")
(find-eev "README")
(find-eev "eev-rctool")
@end example

@cindex environment variables
@cindex eev block
@cindex $EE
@cindex $EEVTMPDIR


@node introduction, loose ends, installation, Top
@comment  node-name,  next,  previous,  up
@chapter Introduction

(See the sections)

@menu
* abstract::                    Abstract
* three interfaces::            Three kinds of interfaces
* one thing well::              ``Make each program do one thing well''
* making progs receive cmds::   Making programs receive commands
* sending commands::            Sending Commands
* hyperlinks::                  Hyperlinks
* shorter hyperlinks::          Shorter Hyperlinks
* forward and back::            Keys for following hyperlinks and for going back
* dangerous hyperlinks::        Dangerous hyperlinks
* generating hyperlinks::       Generating Hyperlinks
* returning::                   Returning from hyperlinks
* local copies::                Local copies of files from the internet
* rcfiles::                     rcfiles
* glyphs::                      Glyphs
* compose pairs::               Compose Pairs
* delimited regions::           Delimited regions
* communication channels::      Communication channels
* implementation of channels::  The Implementation of Communication Channels
* anchors::                     Anchors
* e-scripts::                   E-scripts
* splitting eev.el::            Splitting eev.el
* eesteps::                     eesteps
* eepitch::                     Sending lines to processes running in Emacs buffers
* eepitch and rcfiles::         Using eepitch to control unprepared shells
* eepitch-gud::                 Controlling debuggers with eepitch
* eepitch-gdb::                 E-scripting GDB with eepitch
* little debugging languages::  Two little languages for debugging
* inspecting data::             Inspecting data in running programs
* big modular e-scripts::       Big Modular E-scripts
* iskidip::                     Internet Skills for Disconnected People
@end menu

@node abstract, three interfaces, introduction, introduction
@comment  node-name,  next,  previous,  up
@section Abstract

Interacting with programs with command-line interfaces always involves
a bit of line editing, and each CLI program tends to implement
independently its own minimalistic editing features. We show a way of
centralizing these editing tasks by making these programs receive
commands that are prepared, and sent from, Emacs.  The resulting
system is a kind of Emacs- and Emacs Lisp-based ``universal
scripting language'' in which commands can be sent to both external
programs and to Emacs itself either in blocks or step-by-step under
very fine control from the user.

@node three interfaces, one thing well, abstract, introduction
@comment  node-name,  next,  previous,  up
@section Three kinds of interfaces

Interactive programs in a Un*x system(1) can have basically three
kinds of interfaces: they can be mouse-oriented, like most programs
with graphical interfaces nowadays, in which commands are given by
clicking with the mouse; they can be character-oriented, like most
editors and mail readers, in which most commands are single keys or
short sequences of keys; and they can be line-oriented, as, for
example, shells are: in a shell commands are given by editing a full
line and then typing ``enter'' to process that line.

It is commonplace to classify computer users in a spectrum where the
``users'' are in one extreme and the ``programmers'' are in the
other; the ``users'' tend to use only mouse-oriented and
character-oriented programs, and the ``programmers'' only
character-oriented and line-oriented programs.

In this paper we will show a way to ``automate'' interactions with
line-oriented programs, and, but not so well, to character-oriented
programs; more precisely, it is a way to edit commands for these
programs in a single central place --- Emacs --- and then send them to
the programs; re-sending the same commands afterwards, with or without
modifications, then becomes very easy.

This way (``e-scripts'') can not be used to send commands to
mouse-oriented programs --- at least not without introducing several
new tricks. But ``programmers'' using Un*x systems usually see most
mouse-oriented programs --- except for a few that are
@emph{intrinsically} mouse-oriented, like drawing programs --- as being
just wrappers around line-oriented programs than perform the same
tasks with different interfaces; and so, most mouse-oriented programs
``do not matter'', and our method of automating interactions using
e-scripts can be used to automate ``almost everything''; hence the
title of the paper.


(1): Actually we are more interested in GNU systems than in
``real'' Unix systems; the reasons will become clear in the section
nnn. By the way: the term ``Unix'' is Copyright (C) Bell Labs.

@node one thing well, making progs receive cmds, three interfaces, introduction
@comment  node-name,  next,  previous,  up
@section ``Make each program do one thing well''

One of the tenets of the Unix philosophy is that each program
should do one thing, and do it well; this is a good design rule for
Unix programs because the system makes it easy to invoke external
programs to perform tasks, and to connect programs.

Some of parts of a Unix system are more like ``meta-programs'' or
``sub-programs'' than like self-contained programs that do some
clearly useful task by themselves. Shells, for example, are
meta-programs: their main function is to allow users to invoke
``real programs'' and to connect these programs using pipes,
redirections, control structures (@code{if}, @code{for}, etc) and Unix
``signals''. On the other hand, libraries are sub-programs: for
example, on GNU systems there's a library called GNU readline that
line-oriented programs can use to get input; if a program, say,
@code{bc} (a calculator) gets its input by calling @code{readline(...)}
instead of using the more basic function @code{fgets(...)} then its
line-oriented interface will have a little more functionality: it will
allow the user to do some minimal editing in the current line, and
also to recall, edit and issue again some of the latest commands
given.

@node making progs receive cmds, sending commands, one thing well, introduction
@comment  node-name,  next,  previous,  up
@section Making programs receive commands


@example
[See:]
(find-eev "eev.el")
(find-eev "eev-mini.el" "find-fline")
(find-eev "INSTALL")
(find-eev "eev-rctool")
@end example


@cindex temporary script file
@cindex ee
@cindex .bashrc
@cindex .zshrc
@cindex $EE
@cindex $EEVTMPDIR

Many line-oriented programs allow ``scripting'', which means
executing commands from a file. For example, in most shells we can say
@code{source ~/ee.sh}, and the shell will then execute the commands in
the file @code{~/ee.sh}. There are other ways of executing commands from
a file --- like @code{sh ~/ee.sh} --- but the one with @code{source} is
the one that we'll be more interested in, because it is closer to
running the commands in @code{~/ee.sh} one by one by hand: for example,
with @code{source ~/ee.sh} the commands that change parameters of the
shell --- like the current directory and the environment variables ---
will work in the obvious way, while with @code{sh ~/ee.sh} they
would only change the parameters of a temporary sub-shell; the current
directory and the environment variables of the present shell would be
``protected''.

So, it is possible to prepare commands for a shell (or for scriptable
line-oriented programs; for arbitrary line-oriented programs see the
section nnn) in several ways: by typing them at the shell's interface
--- and if the shell uses readline its interface can be reasonably
friendly --- or, alternatively, by using a text editor to edit a file,
say, @code{~/ee.sh}, and by then ``executing'' that file with
@code{source ~/ee.sh}. @code{source ~/ee.sh} is a lot of keystrokes, but
that can be shortened if we can define a shell function: by putting


@example
function ee () @{ source ~/ee.sh; @}
@end example


@noindent in the shell's initialization file (@code{~/.bashrc}, @code{~/.zshrc},
...) we can reduce @code{source ~/ee.sh} to just @code{ee}: @kbd{e},
@kbd{e}, @kbd{enter} --- three keystrokes.

We just saw how a shell --- or, by the way, any line-oriented program
in which we can define an @code{ee} function like we did for the shell
--- can receive commands prepared in an external editor and stored in
a certain file; let's refer to that file, @code{~/ee.sh}, as a
@emph{temporary script file}. Now it remains to see how an external text
editor can ``send commands to the shell'', i.e., how to make the
editor save some commands in a temporary script file in a convenient
way, that is, without using too many keystrokes...

@node sending commands, hyperlinks, making progs receive cmds, introduction
@comment  node-name,  next,  previous,  up
@section Sending Commands

@cindex Lisp
@cindex eev
@cindex M-x eev
@cindex mark
@cindex verbose mode

GNU Emacs, ``the extensible, self-documenting text-editor''
([Stallman79]), does at least two things very well: one is to edit
text, and so it can be used to edit temporary scripts, and thus to
send commands to shells and to line-oriented programs with @code{ee}
functions; and the other one is to run Lisp. Lisp is a powerful
programming language, and (at least in principle!) any action or
series of actions can be expressed as a program in Lisp; the first
thing that we want to do is a way to mark a region of a text and
``send it as commands to a shell'', by saving it in a temporary
script file. We implement that in two ways:


@example
 1: (defun ee (s e)
 2:   "Save the region in a temporary script"
 3:   (interactive "r")
 4:   (write-region s e "~/ee.sh"))
 5:
 6: (defun eev (s e)
 7:   "Like `ee', but the script executes in verbose mode"
 8:   (interactive "r")
 9:   (write-region
10:    (concat "set -v\n" (buffer-substring s e)
11:            "\nset+v")
12:    nil "~/ee.sh"))
@end example


@code{ee} (the name stands for something like `emacs-execute') just
saves the currently-marked region of text to @code{~/ee.sh}; @code{eev}
(for something like `emacs-execute-verbose') does the same but
adding to the beginning of the temporary script a command to put the
shell in ``verbose mode'', where each command is displayed before
being executed, and also adding at the end an command to leave verbose
mode.

We can now use @code{ee} and @code{eev} to send a block of commands to a
shell: just select a region and then run @code{ee} or @code{eev}. More
precisely: mark a region, that is, put the cursor at one of the
extremities of the region, then type @kbd{C-SPC} to set Emacs's
``mark'' to that position, then go to other extremity of the region
and type @kbd{M-x eev} (@kbd{C-SPC} and @kbd{M-x} are Emacs's notations
for Control-Space and Alt-x, a.k.a. ``Meta-x''). After doing that, go
to a shell and make it ``receive these commands'', by typing @code{ee}.

@node hyperlinks, shorter hyperlinks, sending commands, introduction
@comment  node-name,  next,  previous,  up
@section Hyperlinks


@example
[See:]
(find-eev "eev.el"      "find-fline")
(find-eev "eev-mini.el" "find-fline")
@end example

@cindex find-file
@cindex find-fline
@cindex find-node
@cindex ee-goto-position

When we are using a system like *NIX, in a part of the time we are
using programs with which we are perfectly familiar, and in the rest
of the time we are using things that we don't understand completely
and that make us have to access the documentation from time to time.
In a GNU system the documentation is all on-line, and the steps needed
to access any piece of documentation can be automated. We can use
Emacs Lisp ``one-liners'' to create ``hyperlinks'' to files:


@example
A: (info "(emacs)Lisp Eval")
B: (find-file "~/usrc/busybox-1.00/shell/ash.c")
C: (find-file "/usr/share/emacs/21.4/lisp/info.el")
@end example


@noindent These expressions, when executed --- which is done by placing the
cursor after them and then typing @kbd{C-x C-e}, or, equivalently,
@kbd{M-x eval-last-sexp} --- will (A) open a page of Emacs manual (the
manual is a set of files in ``Info'' format), (B) open the source
file @code{shell/ash.c} of a program called busybox, and (C) open the
file @code{info.el} from the Emacs sources, respectively. As some of
these files and pages can be very big, these hyperlinks are not yet
very satisfactory: we want ways to not only open these files and pages
but also to ``point to specific positions'', i.e., to make the cursor
go to these positions automatically. We can do that by defining some
new hyperlink functions, that are invoked like this:


@example
A': (find-node "(emacs)Lisp Eval" "C-x C-e")
B': (find-fline "~/usrc/busybox-1.00/shell/ash.c"
                "void\nevalpipe")
C': (find-fline "/usr/share/emacs/21.4/lisp/info.el"
                "defun info")
@end example


The convention is that these ``extended hyperlink functions'' have
names like @code{find-xxxnode}, @code{find-xxxfile}, or
@code{find-xxxyyy}; as the name @code{find-file} was already taken by a
standard Emacs function we had to use @code{find-fline} for ours.

Here are the definitions of @code{find-node} and @code{find-fline}:


@example
14: (defun ee-goto-position (&optional pos-spec)
15:   "If POS-SPEC is a string search for its first
16:    occurrence in the file; if it is a number go to the
17:    POS-SPECth line; if it is nil, don't move."
18:   (cond ((null pos-spec))
19:         ((numberp pos-spec)
20:          (goto-char (point-min))
21:          (forward-line (1- pos-spec)))
22:         ((stringp pos-spec)
23:          (goto-char (point-min))
24:          (search-forward pos-spec))
25:         (t (error "Invalid pos-spec: %S" pos-spec))))
26:
27: (defun find-fline (fname &optional pos-spec)
28:   "Like (find-file FNAME), but accepts a POS-SPEC"
29:   (find-file fname)
20:   (ee-goto-position pos-spec))
31:
32: (defun find-node (node &optional pos-spec)
33:   "Like (info NODE), but accepts a POS-SPEC"
34:   (info node)
35:   (ee-goto-position pos-spec)))
@end example


Now consider what happens when we send to a shell a sequence of
commands like this one:


@example
# (find-node "(gawk)Fields")
seq 4 9 | gawk '@{print $1, $1*$1@}'
@end example


@noindent the shell ignores the first line because of the @code{#}, that makes
the shell treat that line as a comment; but when we are editing that
in Emacs we can execute the `@samp{(find-node ...)} with @kbd{C-x
C-e}. Hyperlinks can be mixed with shell code --- they just need to be
marked as comments.

Note: the actual definitions of @code{eev}, @code{ee-goto-position},
@code{find-fline} and @code{find-node} in eev's source code are a bit
more complex than the code in the listings above (lines 6--12 in the
previous section and 14--35 in the current section). In all the (few)
occasions in this paper where we will present the source code of eev's
functions what will be shown are versions that implement only the
``essence'' of those functions, stripped down of all extra
functionality. The point that we wanted to stress with those listings
is how natural it is to use Emacs in a certain way, as an editor for
commands for external programs, and with these plain-text hyperlinks
that can be put almost anywhere: the essence of that idea can be
implemented in 30 lines of Lisp and one or two lines of shell code.

(See also: the section about [_ e-scripts]).

@node shorter hyperlinks, forward and back, hyperlinks, introduction
@comment  node-name,  next,  previous,  up
@section Shorter Hyperlinks


@example
[See:]
(find-eev "eev.el"      "code-c-d")
(find-eev "eev-mini.el" "code-c-d")
@end example


The hyperlinks in lines @code{A''}, @code{B''} and @code{C''}, below,


@example
A'': (find-enode "Lisp Eval" "C-x C-e")
B'': (find-busyboxfile "shell/ash.c" "void\nevalpipe")
C'': (find-efile "info.el" "defun info")
@end example


@noindent are equivalent to the ones labeled @code{A'}, @code{B'}, @code{C'} in
Section 5, but are a bit shorter, and they hide details like Emacs's
path and the version of BusyBox; if we switch to newer versions of
Emacs and BusyBox we only need to change the definitions of
@code{find-busyboxfile} and @code{find-efile} to update the hyperlinks.
Usually not many things change from one version of a package to
another, so most hyperlinks continue to work after the update.

Eev defines a function called @code{code-c-d} that makes defining
functions like @code{find-enode}, @code{find-busyboxfile} and
@code{find-efile} much easier:


@example
(code-c-d "busybox" "~/usrc/busybox-1.00/")
(code-c-d "e" "/usr/share/emacs/21.4/lisp/" "emacs")
@end example


The arguments for @code{code-c-d} are (1) a ``code'' (the ``xxx'' in
a @code{find-xxxfile}), (2) a directory, and optionally (3) the name of
a manual in Info format. The definition of @code{code-c-d} is not very
interesting, so we won't show it here.

@node forward and back, dangerous hyperlinks, shorter hyperlinks, introduction
@comment  node-name,  next,  previous,  up
@section Keys for following hyperlinks and for going back

@cindex M-k
@cindex M-K
@cindex C-x C-e
@cindex M-e
@cindex M-E
@cindex following hyperlinks
@cindex returning from hyperlinks
@cindex hyperlinks, following
@cindex hyperlinks, returning from
@cindex prefix arguments

Lisp hyperlinks usually extend from a certain position in a line ---
usually after a comment sign --- to the end of the line, like this:


@example
# (find-bashnode "Comments" "`#'")

;; (find-elnode  "Comments" "`;'")
;; (find-elnode  "Comment Tips" "`;;'")
@end example


The obvious way to follow a hyperlinks like the above is with @kbd{C-e
C-x C-e} (@code{move-end-of-line}, then @code{eval-last-sexp}), but this
is so common an operation that eev implements a shortcut for it: when
eev-mode is active the effect of typing @kbd{M-e}
(@code{eek-eval-sexp-eol}) is roughly the same as @kbd{C-e C-x C-e}.

The main difference between @kbd{M-e} and @kbd{C-e C-x C-e} is how they
behave when called with numeric ``prefix arguments'': for example,
@kbd{M-0 M-e} highlights temporarily the Lisp expression instead of
executing it and @kbd{M-4 M-e} executes it with some debugging flags
turned on, while @kbd{C-x C-e} when called with any prefix argument
inserts the result of the expression at the cursor instead of showing
it at the echo area.

The key @kbd{M-E} (@code{eek-eval-last-sexp}) is like @kbd{M-e}, but it
doesn't move to the end of line; it executes the sexp ending just
before point with the same behavior on prefix arguments as @kbd{M-e}.

So, @kbd{M-e} and @kbd{M-E} and keys for following hyperlinks. Usually
following a hyperlink creates a new buffer, and we can ``go back'' by
deleting this new buffer or by just returning to the previous buffer.
Eev-mode defines two keys for that: @kbd{M-k}
(@code{ee-kill-this-buffer}) and @kbd{M-K} (@code{bury-buffer}).

@node dangerous hyperlinks, generating hyperlinks, forward and back, introduction
@comment  node-name,  next,  previous,  up
@section Dangerous hyperlinks


@example
[See:]
(find-eev "eev.el" "find-sh")
(find-eev "eev-mini.el" "find-sh")
@end example

@cindex Forth

Note that these ``hyperlinks'' can do very dangerous things. If we
start to execute blindly every Lisp expression we see just because it
can do something interesting or take us to an interesting place then
we can end up running something like:


@example
(shell-c_ommand "rm -Rf ~")
@end example


@noindent which destroy all files in our home directory; not a good idea.
Hyperlinks ought to be safer than that...

The modern approach to safety in hyperlinks --- the one found in web
browsers, for example --- is that following a hyperlink can execute
only a few kinds of actions, all known to be safe; the ``target'' of
a hyperlink is something of the form @code{http://...}, @code{ftp://...},
@code{file://...}, @code{info://...}, @code{mailto:...} or at worst like
@code{javascript:...}; none of these kinds of actions can even erase our
files. That approach limits a lot what hyperlinks can do, but makes it
harmless to hide the hyperlink action and display only some
descriptive text.

Eev's approach is the opposite of that. I wrote the first functions of
eev in my first weeks after installing GNU/Linux in my home machine
and starting using GNU Emacs, in 1994; before that I was using mostly
Forth (on MS-DOS), and I hadn't had a lot of exposure to *NIX systems
by then --- in particular, I had tried to understand *NIX's notions of
user IDs and file ownerships and permissions, and I felt that they
were a thick layer of complexity that I wasn't being able to get
through.

Forth's attitude is more like ``the user knows what he's doing''; the
system is kept very simple, so that understanding all the consequences
of an action is not very hard. If the user wants to change a byte in a
critical memory position and crash the machine he can do that, and
partly because of that simplicity bringing the machine up again didn't
use to take more than one minute (in the good old days, of course).
Forth people developed good backup strategies to cope with the
insecurities, and --- as strange as that might sound nowadays, where
all machines are connected and multi-user and crackers abound ---
using the system in the Forth way was productive and fun.

*NIX systems are not like Forth, but when I started using them I was
accustomed to this idea of achieving simplicity through the lack of
safeguards, and eev reflects that. The only thing that keeps eev's
hyperlinks reasonably safe is ``transparency'': the code that a
hyperlink executes is so visible that it is hard to mistake a
dangerous Lisp expression for a ``real'' hyperlink. Also, all the
safe hyperlink functions implemented by eev start with @code{find-},
and all the @code{find-} functions in eev are safe, except for those
with names like @code{find-xxxsh} and @code{find-xxxsh0}: for example,


@example
(find-sh "wget --help" "recursive download")
@end example


@noindent executes @samp{wget --help}, puts the output of that in an Emacs
buffer and then jumps to the first occurrence of the string
@code{recursive download} there; other @code{find-xxxsh} functions are
variations on that that execute some extra shell commands before
executing the first argument --- typically either switching to another
directory or loading an initialization file, like @code{~/.bashrc} or
@code{~/.zshrc}. The @code{find-xxxsh0} functions are similar to their
@code{find-xxxsh} counterparts, but instead of creating a buffer with
their output they just show it at Emacs's echo area and they use only
the first argument and ignore the others (the pos-spec).

@node generating hyperlinks, returning, dangerous hyperlinks, introduction
@comment  node-name,  next,  previous,  up
@section Generating Hyperlinks


@example
[See:]
(find-eev "eev-insert.el")
(find-eevfile "article/ss-m-h.png")
(find-eevex "screenshots.e" "fisl-screenshots-M-h")
(find-eev "eev-mini-steps.el" "eek")
@end example


@cindex eek

Do we need to remember the names of all hyperlinks functions, like
@code{find-fline} and @code{find-node}? Do we need to type the code for
each hyperlink in full by hand? The answers are ``no'' and ``no''.

Eev implements several functions that create temporary buffers
containing hyperlinks, that can then be cut and pasted to other
buffers. For example, @kbd{M-h M-f} creates links about an Emacs Lisp
function: typing @kbd{M-h M-f} displays a prompt in a minibuffer asking
for the name of an Elisp function; if we type, say, @code{find-file}
there (note: name completion with the TAB key works in that prompt) we
get a buffer like the one in figure 1.


@verbatim
 _________________________________________________________ 
|# (find-efunction-links 'find-file)                      |
|                                                         |
|# (where-is 'find-file)                                  |
|# (describe-function 'find-file)                         |
|# (find-efunctiondescr 'find-file)                       |
|# (find-efunction 'find-file)                            |
|# (find-efunctionpp 'find-file)                          |
|# (find-efunctiond 'find-file)                           |
|# (find-eCfunction 'find-file)                           |
|# (find-estring (documentation 'find-file))              |
|# (find-estring (documentation 'find-file t))            |
|                                                         |
|# (Info-goto-emacs-command-node 'find-file)              |
|# (find-enode "Command Index" "* find-file:")            |
|# (find-elnode "Index" "* find-file:")                   |
|                                                         |
|                                                         |
|                                                         |
|--:**  *Elisp hyperlinks*   All L18    (Fundamental)-----|
|_________________________________________________________|

  Figure 1: the result of typing M-h M-f find-file
@end verbatim


The first line of that buffer is a hyperlink to that
dynamically-generated page of hyperlinks. Its function ---
@code{find-efunction-links} --- has a long name that is hard to
remember, but there's a shorter link that will do the same job:


@example
(eek "M-h M-f find-file")
@end example


The argument to @code{eek} is a string describing a sequence of keys in
a certain verbose format, and the effect of running, say, @samp{(eek
"M-h M-f find-file")} is the same as of typing @kbd{M-h M-f find-file}.

(@kbd{M-h} is a prefix; @samp{(eek "M-h C-h")} shows all the sequences
with the same prefix.)

(Exceptions: @kbd{M-h M-c}, @kbd{M-h M-2}, @kbd{M-h M-y}. Show examples
of how to edit hyperlinks with @kbd{M-h M-2} and @kbd{M-h M-y}.)

(Mention hyperlinks about a key sequence? @samp{(eek "M-h M-k C-x
C-f")})
 
(Mention hyperlinks about a Debian package? @samp{(eek "M-h M-d
bash")})

@node returning, local copies, generating hyperlinks, introduction
@comment  node-name,  next,  previous,  up
@section Returning from hyperlinks

((Mention M-k to kill the current buffer, and how Emacs asks for
confirmation when it's a file and it's modified))

((Mention M-K for burying the current buffer))

((Mention what to do in the cases where a hyperlink points to the
current buffer (section 16); there used to be an @code{ee-back}
function bound to @kbd{M-B}, but to reactivate it I would have to add
back some ugly code to `to'... (by the way, that included Rubikitch's
contributions)))

((Web browsers have a way to ``return'' from hyperlinks: the
``back'' button... In eev we have many kinds of hyperlinks, including
some that are unsafe and irreversible, but we have a few kinds of
``back''s that work... 1) if the hyperlink opened a new file or
buffer, then to kill the file or buffer, use @kbd{M-k} (an eev binding
for @code{kill-this-buffer}; note that it asks for a confirmation when
the buffer is associated to a file and it has been modified --- or we
can use bury-buffer; @kbd{M-K} is an eev binding for @code{bury-buffer}.
((explain how emacs keeps a list of buffers?)) Note: if the buffer
contains, say, a manpage, or an html page rendered by w3m, which take
a significant time to generate, then @kbd{M-K} is better is than
@kbd{M-k}. 2) if the hyperlink was a @code{to} then it jumped to another
position in the same file... it is possible to keep a list of previous
positions in a buffer and to create an @code{ee-back} function
(suggestion: bind it to @kbd{M-B} but I haver never been satisfied with
the implementations that I did so we're only keeping a hook in
@code{to} for a function that saves the current position before the
jump))

((dto recommended @code{winner-undo}))

@node local copies, rcfiles, returning, introduction
@comment  node-name,  next,  previous,  up
@section Local copies of files from the internet


@example
[See:]
(find-eev "rcfiles/.bashrc-psne")
(find-eev "rcfiles/.zshrc-psne")
(find-eev "eev-rctool" "new_block_bashrc")
http://lists.gnu.org/archive/html/eev/2005-06/msg00000.html
http://article.gmane.org/gmane.emacs.eev.devel/9
@end example

@cindex psne
@cindex $S

Emacs knows how to fetch files from the internet, but for most
purposes it is better to use local copies. Suppose that the
environment variable @samp{$S} is set to @code{~/snarf/}; then running
this on a shell


@example
mkdir -p $S/http/www.gnu.org/software/emacs/
cd       $S/http/www.gnu.org/software/emacs/
wget http://www.gnu.org/software/emacs/emacs-paper.html

# (find-fline "$S/http/www.gnu.org/software/emacs/emacs-paper.html")
# (find-w3m   "$S/http/www.gnu.org/software/emacs/emacs-paper.html")
@end example


@noindent creates a local copy of @code{emacs-paper.html} inside
@code{~/snarf/http/}. The two last lines are hyperlinks to the local
copy; @code{find-w3m} opens it ``as HTML'', using a web browser called
w3m that can be run either in standalone mode or inside Emacs;
@code{find-w3m} uses w3m's Emacs interface, and it accepts extra
arguments, which are treated as a pos-spec-list.

Instead of running the @samp{mkdir}, @samp{cd} and @samp{wget} lines
above we can run a single command that does everything:


@example
psne http://www.gnu.org/software/emacs/emacs-paper.html
@end example


@noindent which also adds a line with that URL to a log file (usually
@code{~/.psne.log}). It is more convenient to have a @samp{psne} that
changes the current directory of the shell than one that doesn't, and
for that it must be defined as a shell function.

@node rcfiles, glyphs, local copies, introduction
@comment  node-name,  next,  previous,  up
@section rcfiles


@example
[See:]
(find-eev "INSTALL")
(find-eev "eev-rctool")
(find-eevsh "./eev-rctool notes")
(find-eev     "eev-rctool" "notes")
(find-eev     "eev-rctool"     "new_block_emacs")
(find-eev     "eev-rctool"     "new_block_emacs")
(find-eev     "eev-rctool" "current_block_gdbinit")
@end example


Eev comes with an installer script, called @samp{eev-rctool}, that can
help in adding the definitions for eev (like the @samp{function ee
() @{ source ~/ee.sh;@}} of section 3) to initialization files like
@code{~/.bashrc} (such initialization files are termed ``rcfiles'').
Eev-rctool does @emph{not} add by default the definitions for @samp{psne}
and for @samp{$S} to rcfiles; however, it adds commented-out lines
with instructions, which might be something like:


@example
# To define $S and psne uncomment this:
#   . $EEVTMPDIR/psne.sh
# (find-eevtmpfile "psne.sh")
@end example


@node glyphs, compose pairs, rcfiles, introduction
@comment  node-name,  next,  previous,  up
@section Glyphs


@example
[See:]
(find-eev "eev-glyphs.el")
(find-eev "eev-math-glyphs.el")
(find-eev "eev-mini.el" nil "eev-glyph-face-red")
(find-eev "eev-sshot.el")
http://angg.twu.net/flipbooks/ee-glyph.html
@end example


Emacs allows redefining how characters are displayed, and one of the
modules of eev --- eev-glyphs --- uses that to make some characters
stand out. Character 15, for example, is displayed on the screen by
default as @kbd{^O} (two characters, suggesting ``control-O''),
sometimes in a different color from normal text(3).]

 Eev changes the appearance of char 15 to make it be displayed as a
red star. Here is how: Emacs has some structures called ``faces''
that store font and color information, and @code{eeglyphs-face-red}
is a face that says ``use the default font and the default
background color, but a red foreground''; eev's initialization code
runs this,


@example
(eev-set-glyph 15 ?* 'eev-glyph-face-red)
@end example


@noindent which sets the representation of char 15 to the ``glyph'' made of
a star in the face @code{eeglyphs-face-red}.

For this article, as red doesn't print well in black and white, we
used this instead:


@example
(eev-set-glyph 15 342434)
@end example


@noindent this made occurrences of char 15 appear as the character 342434,
@samp{*} (note that this is outside of the ascii range), using the
default face, i.e., the default font and color.

Eev also sets a few other glyphs with non-standard faces. The most
important of those are @samp{«} and @samp{»}, which are set to appear in
green against the default background, with:


@example
(eev-set-glyph 171 171 'eev-glyph-face-green)
(eev-set-glyph 187 187 'eev-glyph-face-green)
@end example


There's a technical point to be raised here. Emacs can use several
``encodings'' for files and buffers, and @samp{«} and @samp{»} only
have character codes 171 and 187 in a few cases, mainly in the
`raw-text' encoding and in ``unibyte'' buffers; in most other
encodings they have other char codes, usually above 255, and when they
have these other codes Emacs considers that they are other characters
for which no special glyphs were set and shows them in the default
face. This visual distinction between the below-255 @samp{«} and
@samp{»} and the other @samp{«} and @samp{»}s is deliberate --- it helps
preventing some subtle bugs involving the anchor functions of section
[anchors].

(3). Determined by the ``face'' @code{escape-glyph-face},
introduced in GNU Emacs in late 2004.

@node compose pairs, delimited regions, glyphs, introduction
@comment  node-name,  next,  previous,  up
@section Compose Pairs


@example
[See:]
(find-eev "eev-compose.el")
@end example


To insert a @samp{*} in a text we type @kbd{C-q C-o} --- @kbd{C-q}
``quotes'' the next key that Emacs receives, and @kbd{C-q C-o} inserts
a ``literal C-o'', which is a char 15. Typing @samp{«} and @samp{»}s
--- and other non-standard glyphs, if we decide to define our own ---
involves using another module of eev: @samp{eev-compose}.

Eev-compose defines a few variables that hold tables of ``compose
pairs'', which map pairs of characters that are easy to type into
other, weirder characters; for example, @code{eev-composes-otheriso}
says that the pair @samp{<<} is mapped to @samp{«} and that @samp{>>} is
mapped to @samp{»}, among others. When we are in ``eev mode'' the
prefix @kbd{M-,} can be used to perform the translation: typing @kbd{M-,
< <} enters @samp{«}, and typing @kbd{M-, > >} enters @samp{»}.

The variable @code{eev-composes-accents} holds mappings for accented
chars, like @samp{'a} to @samp{á} and @samp{cc} to @samp{ç};
@code{eev-composes-otheriso} takes care of the other mappings that
still concern characters found in the ISO8859-1 character set, like
@samp{«} and @samp{»} as above, @samp{_a} to @samp{ª}, @samp{xx} to
@samp{×}, and a few others; @code{eev-composes-globalmath} and
@code{eev-composes-localmath} are initially empty and are meant to be
used for used-defined glyphs. The suffix @code{math} in their names is
a relic: Emacs implements its own ways to enter special characters,
which support several languages and character encodings, but their
code is quite complex and they are difficult to extend; the code that
implements eev's @kbd{M-,}, on the other hand, takes about just 10
lines of Lisp (excluding the tables of compose pairs) and it is
trivial to understand and to change its tables of pairs. @kbd{M-,} was
created originally to enter special glyphs for editing mathematical
texts in TeX, but it turned out to be a convenient hack, and it
stuck.

@node delimited regions, communication channels, compose pairs, introduction
@comment  node-name,  next,  previous,  up
@section Delimited regions


@example
[See:]
(find-eev "eev-bounded.el")
(find-eev "eev-mini.el" "eeb-default")
(find-eev "doc/shot-f3.png")
(find-eev "anim/gdb.anim")
@end example

@cindex eev-bounded
@cindex eelatex
@cindex eelatex-bounded
@cindex eeb-define
@cindex ee-once
@cindex ee-delimiter-hash
@cindex ee-delimiter-percent
@cindex eeb-defaults
@cindex highlighting
@cindex flashing

Sometimes it happens that we need to run a certain (long) series of
commands over and over again, maybe with some changes from one run to
the next; then having to mark the block all the time becomes a hassle.

One alternative to that is using a variaton on @kbd{M-x eev}: @kbd{M-x
eev-bounded}. It saves the region around the cursor up to certain
delimiters instead of saving what's between Emacs's ``point'' and
``mark''.

The original definition of eev-bounded was something like this:


@example
(defun eev-bounded ()
  (interactive)
  (eev (ee-search-backwards "\n#*\n")
       (ee-search-forward   "\n#*\n")))
@end example


@noindent the call to @code{ee-search-backwards} searches for the first
occurrence of the string @samp{\n#*\n} (newline, hash sign, control-O,
newline) before the cursor and returns the position after the
@samp{\n#*\n}, without moving the cursor; the call to
@code{ee-search-forward} does something similar with a forward search.
As the arguments to @code{eev} indicate the extremities of the region
to be saved into the temporary script, this saves the region between
the first @samp{\n#*\n} backwards from the cursor to the first
@samp{\n#*\n} after the cursor.

The actual definition of @code{eev-bounded} includes some extra code to
highlight temporarily the region that was used; see [Figure F3].
Normally the highlighting lasts for less than one second, but here we
have set its duration to several seconds to produce a more interesting
screenshot.


@verbatim
 ____________________ emacs@localhost _______________________ 
|                                                _________ xterm __________ 
|#*                                             |/home/edrx(edrx)# ee      |
|# Global variables                             |# Global variables        |
|lua50 -e '                                     |lua50 -e '                |
|  print(print)                                 |  print(print)            |
|  print(_G["print"])                           |  print(_G["print"])      |
|  print(_G.print)                              |  print(_G.print)         |
|  print(_G)                                    |  print(_G)               |
|  print(_G._G)                                 |  print(_G._G)            |
|'                                              |'                         |
|#*                                             |function: 0x804dfc0       |
|# Capture of local variables                   |function: 0x804dfc0       |
|lua50 -e '                                     |function: 0x804dfc0       |
|  foo = function ()                            |table: 0x804d420          |
|    local storage                              |table: 0x804d420          |
|    return                                     |/home/edrx(edrx)#         |
|      (function () return storage end),        |__________________________|
|      (function (x) storage = x; return x end)              |              
|  end                                                       |
|  get1, set1 = foo()                                        |
|  get2, set2 = foo()               -- Output:               |
|  print(set1(22), get1())          -- 22 22                 |
|  print(set2(33), get1(), get2())  -- 33 22 33              |
|'                                                           |
|#*                                                          |
|                                                            |
|-:--  lua5.e   91% L325    (Fundamental)--------------------|
|____________________________________________________________|

  Figure 2: sending a delimited block with F3
  (find-fline "ss-lua.png")
  (find-eevex "screenshots.e" "fisl-screenshots")
@end verbatim


Eev binds the key @kbd{F3} to the function @code{eeb-default}, which
runs the current ``default bounded function'' (which is set initially
to @code{eev}, @emph{not} @code{eev-bounded}) on the region between the
current default delimiters, using the current default
``highlight-spec''; so, instead of typing @kbd{M-x eev-bounded} inside
the region to save it, we can just type @kbd{F3}.

All these defaults values come from a single list, which is stored in
the variable @code{eeb-defaults}. The real definition of
@code{eev-bounded} is something like:


@example
(setq eev-bounded
  '(eev ee-delimiter-hash nil t t))

(defun eev-bounded ()
  (interactive)
  (setq eeb-defaults eev-bounded)
  (eeb-default))
@end example


Note that in Emacs Lisp (and in most other Lisps) each symbol has a
value as a variable that is independent from its ``value as a
function'': actually a symbol is a structure containg a name, a
``value cell'', a ``function cell'' and a few other fields. Our
definition of @code{eev-bounded}, above, includes both a definition of
the function @code{eev-bounded} and a value for the variable
@code{eev-bounded}.

Eev has an auxiliary function for defining these ``bounded
functions''; running


@example
(eeb-define 'eev-bounded 'eev 'ee-delimiter-hash nil t t)
@end example


@noindent has the same effect as doing the @code{setq} and the @code{defun}
above.

As for the meaning of the entries of the list @code{eeb-defaults}, the
first one (@code{eev}) says which function to run; the second one
(@code{ee-delimiter-hash}) says which initial delimiter to use --- in
this case it is a symbol instead of a string, and so @code{eeb-default}
takes the value of the variable @code{ee-delimiter-hash}; the third one
(nil) is like the second one, but for the final delimiter, and when it
is nil @code{eeb-default} considers that the final delimiter is equal
to the initial delimiter; the fourth entry (@code{t}) means to use the
standard highlight-spec, and the fifth one (@code{t}, again) tells
@code{eeb-default} to make an adjustment to the highlighted region for
purely aestethical reasons: the saved region does not include the
initial @samp{\n} in the final delimiter, @samp{\n#*\n}, but the
highlighting looks nicer if it is included; without it the last
highlighted line in Figure 2 would have only its first character ---
an apostrophe --- highlighted.

Eev also implements other of these ``bounded'' functions. For
example, running @kbd{M-x eelatex} on a region saves it in a temporary
LaTeX file, and also saves into the temporary script file the commands
to process it with LaTeX; @code{eelatex-bounded} is defined by


@example
(eeb-define 'eelatex-bounded 'eelatex
  'ee-delimiter-percent nil t t)
@end example


@noindent where the variable @code{ee-delimiter-percent} holds the string
@samp{\n%*\n}; comments in LaTeX start with percent signs, not hash
signs, and it is convenient to use delimiters that are treated as
comments.

((The block below ... tricky ... blah. How to typeset @samp{*} in
LaTeX. Running @code{eelatex-bounded} changed the defaults stored in
@code{eeb-defaults}, but @code{ee-once} blah doesn't.))


@verbatim
%*
% (eelatex-bounded)
% (ee-once (eelatex-bounded))
\def\myttbox#1{%
  \setbox0=\hbox{\texttt{a}}%
  \hbox to \wd0{\hss#1\hss}%
}
\catcode`*=13 \def*{\myttbox{$\bullet$}}
\begin{verbatim}
abcdefg
   d*fg
\end{verbatim}
%*
@end verbatim


...for example @code{eelatex}, that saves the region (plus certain
standard header and footer lines) to a ``temporary LaTeX file'' and
saves into the temporary script file the commands to make @samp{ee} run
LaTeX on that and display the result. The block below is an example of
(...)

...The block below shows a typical application of @code{eev-bounded}:


@example
# (find-es "lua5" "install-5.0.2")
# (find-es "lua5" "install-5.0.2" "Edrx's changes")
# (code-c-d "lua5" "/tmp/usrc/lua-5.0.2/")
# (find-lua5file "INSTALL")
# (find-lua5file "config" "support for dynamic loading")
# (find-lua5file "config")
# (find-lua5file "")
#*
rm   -Rv ~/usrc/lua-5.0.2/
mkdir -p ~/usrc/lua-5.0.2/
tar   -C ~/usrc/ \
   -xvzf $S/http/www.lua.org/ftp/lua-5.0.2.tar.gz
cd       ~/usrc/lua-5.0.2/
cat >> config <<'---'
LOADLIB= -DUSE_DLOPEN=1
DLLIB= -ldl
MYLDFLAGS= -Wl,-E
EXTRA_LIBS= -lm -ldl
---
make test  2>&1 | tee omt
./bin/lua -e 'print(loadlib)'
#*
@end example


@noindent it unpacks a program (the interpreter for Lua), changes its
default configuration slightly, then compiles and tests it.

((Comment about the size: the above code is ``too small for being a
script'', and the hyperlinks are important))

((gdb (here-documents, gcc, ee-once)))

((alternative: here-documents, gcc, gdb, screenshot(s) for gdb))

@node communication channels, implementation of channels, delimited regions, introduction
@comment  node-name,  next,  previous,  up
@section Communication channels


@example
[See:]
(find-eev "eev-steps.el")
(find-eev "eev-mini-steps.el")
(find-eev "eegchannel")
(find-eev "anim/channels.anim")
@end example

@cindex F9
@cindex eechannel
@cindex eechannel-xterm
@cindex eexterm

The way that we saw to send commands to a shell is in two steps: first
we use @kbd{M-x eev} in Emacs to ``send'' a block of commands, and
then we run @samp{ee} at the shell to make it ``receive'' these
commands. But there is also a way to create shells that ``listen''
not only to the keyboard for their input, but also to certain
``communication channels''; by making Emacs send commands through
these communication channels we can skip the step of going to the
shell and typing @samp{ee} --- the commands are received immediately.


@verbatim
 _________emacs@localhost____________  
|                                    |  ___________channel A______________ 
|* (eechannel-xterm "A") ;; create   | |/tmp(edrx)# # Send things to port |
|* (eechannel-xterm "B") ;; create   | | 1234                             |
|# Listen on port 1234               | |/tmp(edrx)# {                     |
|netcat -l -p 1234                   | |>   echo hi                       |
|*                                   | |>   sleep 1                       |
|* (eechannel "A") ;; change target  | |>   echo bye                      |
|# Send things to port 1234          | |>   sleep 1                       |
|{                                   | |> } | netcat -q 0 localhost 1234  |
|  echo hi                           | |/tmp(edrx)#                       |
|  sleep 1                           | |/tmp(edrx)#                       |
|  echo bye                          | |__________________________________|
|  sleep 1                           |  ___________channel B______________ 
|} | netcat -q 0 localhost 1234      | |/tmp(edrx)# # Listen on port 1234 |
|                                    | |/tmp(edrx)# netcat -l -p 1234     |
|-:--  screenshots.e   95% L409   (Fu| |hi                                |
|_Wrote /home/edrx/.eev/eeg.A.str____| |bye                               |
                                       |/tmp(edrx)#                       |
                                       |                                  |
				       |__________________________________|
 Figure 3: sending commands to two xterms using F9
 (find-eevex "screenshots.e" "fisl-screenshots")
 (find-eevfile "article/ss-f9.png")
@end verbatim


The screenshot at [Figure 3] shows this at work. The user has started
with the cursor at the second line from the top of the screen in the
Emacs window and then has typed @kbd{F9} several times. Eev binds
@kbd{F9} to a command that operates on the current line and then moves
down to the next line; if the current line starts with @samp{*} then
what comes after the @samp{*} is considered as Lisp code and executed
immediately, and the current line doesn't start with @samp{*} then its
contents are sent through the default communication channel, or though
a dummy communication channel if no default was set.]

The first @kbd{F9} executed @samp{(eechannel-xterm "A")}, which
created an xterm with title ``channel A'', running a shell listening
on the communication channel ``A'', and set the default channel to A;
the second @kbd{F9} created another xterm, now listening to channel
B, and set the default channel to B.

The next two @kbd{F9}s sent each one one line to channel B. The first
line was a shell comment (@samp{# Listen...}); the second one started
the program @samp{netcat}, with options to make @samp{netcat} ``listen
to the internet port 1234'' and dump to standard output what it
receives.

The next line had just @samp{*}; executing the rest of it as Lisp did
nothing. The following line changed the default channel to A.]

In the following lines there is a small shell program that outputs
``hi'', then waits one second, then outputs ``bye'', then waits for
another second, then finishes; due to the @samp{| netcat...} its output
is redirected to the internet port 1234, and so we see it appearing as
the output of the netcat running on channel B, with all the expected
delays: one second between ``hi'' and ``bye'', and one second after
``bye''; after that last one-second delay the netcat at channel A
finishes receiving input (because the program between "@{" and "@}"
ends) and it finishes its execution, closing the port 1234; the netcat
at B notices that the port was closed and finishes its execution too,
and both shells return to the shell prompt.

There are also ways to send whole blocks of lines at once through
communication channels; see [Section bigmodular].

@node implementation of channels, anchors, communication channels, introduction
@comment  node-name,  next,  previous,  up
@section The Implementation of Communication Channels


@example
[See:]
(find-eev "eev-mini-steps.el")
(find-eev "eev-steps.el")
(find-eev "eegchannel")
(find-eev "anim/channels.anim")
@end example


Communication channels are implemented using an auxiliary script
called @samp{eegchannel}, which is written in Expect ([L90] and [L95]).
If we start an xterm in the default way it starts a shell (say,
@code{/bin/bash}) and interacts with it: the xterm sends to the shell
as characters the keystrokes that it receives from the window manager
and treats the characters that the shell sends back as being
instructions to draw characters, numbers and symbols on the screen.
But when we run @samp{(eechannel-xterm "A")} Emacs creates an xterm
that interacts with another program --- @samp{eegchannel} --- instead
of with a shell, and @samp{eegchannel} in its turn runs a shell and
interacts with it.

Eegchannel passes characters back and forth between the xterm and the
shell without changing them in any way; it mostly tries to pretend
that it is not there and that the xterm is communicating directly with
the shell. However, when eegchannel receives a certain signal it sends
to the shell a certain sequence of characters that were not sent by
the xterm; it ``fakes a sequence of keystrokes''.

Let's see a concrete example. Suppose than Emacs was running with
process id (``pid'') 1000, and running @samp{(eechannel-xterm "A")}
in it made it create an xterm, which got pid 1001; that xterm ran
@samp{eegchannel} (pid 1002), which ran @samp{/bin/bash} (pid 1003).
Actually Emacs invoked xterm using this command line:


@example
xterm -n "channel A" -e eegchannel A /bin/bash
@end example


@noindent and xterm invoked eegchannel with @samp{eegchannel A /bin/bash};
eegchannel saw the `A', saved its pid (1002) to the file
@code{~/.eev/eeg.A.pid}, and watched for `SIGUSR1' signals; every
time that it (the eegchannel) receives a `SIGUSR1' it reads the
contents of [QQ ~/.eev/eeg.A.str] and sends that as fake input to the
shell that it is controlling. So, running


@example
echo 'echo $[1+2]' > ~/.eev/eeg.A.str
kill -USR1 $(cat ~/.eev/eeg.A.pid)
@end example


@noindent in a shell sends the string @samp{echo $[1+2]} (plus a newline)
``through the channel A''; what Emacs does when we type @kbd{F9} on a
line that does not start with @samp{*} corresponds exactly to that.

@node anchors, e-scripts, implementation of channels, introduction
@comment  node-name,  next,  previous,  up
@section Anchors


@example
[See:]
(find-eev "eev.el" "ee-goto-anchor")
I need to set local vars to make the "to"s in the examples work.
;; (find-eevtexi "eev.texi.lua" "anchors")
;; (find-efunction      'ee-goto-anchor)
;; (find-efunctiondescr 'ee-goto-anchor)
@end example

@cindex to
@cindex find-anchor
@cindex find-status
@cindex find-available
@cindex ee-anchor-format

The function @code{to} can be used to create hyperlink to certain
positions --- called ``anchors'' --- in the current file. For
example,


@example
# Index:
# «.first_block»        (to "first_block")
# «.second_block»       (to "second_block")

#*
# «first_block»  (to ".first_block")
echo blah
#*
# «second_block»  (to ".second_block")
echo blah blah
#*
@end example


What @code{to} does is simply to wrap its argument inside @samp{«} and
@samp{»} characters and then jump to the first occurrence of the
resulting string in the current file. In the (toy) example above, the
line that starts with @samp{# «.first_block»} has a link that jumps
to the line that starts with @samp{# «first_block»}, which has a link
that jumps back --- the anchors and @samp{(to ...)}s act like an
index for that file.

The function @code{find-anchor} works like a @code{to} that first opens
another file. For example,


@example
(find-anchor "~/.zshrc" "update-homepage")
@end example


@noindent does roughly the same as:


@example
(find-fline "~/.zshrc" "«update-homepage»")
@end example


Actually @code{find-anchor} consults a variable,
@code{ee-anchor-format}, to see in which strings to wrap the argument.
Some functions modify @code{ee-anchor-format} temporarily to obtain
special effects; for example, a lot of information about the packages
installed in a Debian GNU system is kept in a text file called
@code{/var/lib/dpkg/info/status}; @samp{(find-status "emacs21")} opens
this file and searches for the string @samp{\nPackage: emacs21\n}
there --- that string is the header for the block with information
about the package @samp{emacs21}, and it tells the size of the package,
description, version, whether it is installed or not, etc, in a format
that is both machine-readable and human-readable.

@node e-scripts, splitting eev.el, anchors, introduction
@comment  node-name,  next,  previous,  up
@section E-scripts

The best short definition for eev that I've found involves some
cheating, as it is a circular definition: ``eev is a library that
adds support for e-scripts to Emacs'' --- and e-scripts are files that
contain chunks meant to be processed by eev's functions. Almost any
file can contain parts ``meant for eev'': for example, a HOWTO or
README file about some program will usually contain some example shell
commands, and we can mark these commands and execute them with @kbd{M-x
eev}; and if we have the habit of using eev and we are writing code
in, say, C or Lua we will often put elisp hyperlinks inside comment
blocks in our code. These two specific languages (and a few others)
have a feature that is quite convenient for eev: they have syntactical
constructs that allow comment blocks spanning several lines --- for
example, in Lua, where these comment blocks are delimited by
@samp{--[[} and @samp{--]]}s, we can have a block like


@example
--[[
#*
# This file: (find-fline "~/LUA/lstoindexhtml.lua")
# A test:
cd /tmp/
ls -laF | col -x \
  | lua50 ~/LUA/lstoindexhtml.lua tmp/ \
  | lua50 -e 'writefile("index.html", io.read("*a"))'
#*
--]]
@end example


@noindent in a Lua script, and the script will be at the same time a Lua
script and an e-script.

When I started using GNU and Emacs the notion of an e-script was
something quite precise to me: I was keeping notes on what I was
learning and on all that I was trying to do, and I was keeping those
notes in a format that was partly English (or Portuguese), partly
executable things --- not all of them finished, or working --- after
all, it was much more practical to write


@example
rm -Rv ~/usrc/busybox-1.00/
tar -C ~/usrc/ -xvzf \
  $S/http/www.busybox.net/downloads/busybox-1.00.tar.gz
cd ~/usrc/busybox-1.00/
cp -iv ~/BUSYBOX/myconfig .config
make menuconfig
make       2>&1 | tee om
@end example


@noindent than to write


@example
Unpack BusyBox's source, then run "make menuconfig"
and "make" on its main directory
@end example


@noindent because if I had the second form in my notes I would have to
translate that from English into machine commands every time... So,
those files where I was keeping my notes contained ``executable
notes'', or were ``scripts for Emacs'', and I was quite sure that
everyone else around were also keeping notes in executable formats,
possibly using other editors and environments (vi, maybe?) and that if
I showed these people my notes and they were about some task that they
were also struggling with then they would also show me @emph{their}
notes... I ended up making a system that uploaded regularly all my
e-scripts (no matter how messy they were) to my home page, and writing
a text --- ``The Eev Manifesto'' ([O99]) --- about sharing these
executable notes.

Actually trying to define an e-script as being ``a file containing
executable parts, that are picked up and executed interactively''
makes the concept of an e-script @emph{very} loose.

Note that we @emph{can} execute the Lua parts in the code above by
running the Lua interpreter on it, we @emph{can} execute the elisp
one-liner with @kbd{M-e} in Emacs, and we @emph{can} execute the shell
commands using @kbd{F3} or @kbd{M-x eev}; but the code will do nothing
by itself --- it is passive.

A piece of code containing instructions in English on how to use it is
also an e-script, in a sense; but to execute these instructions we
need to invoke an external entity --- a human, usually ourselves ---
to interpret them. This is much more flexible, but also much more
error-prone and slow, than just pressing a simple sequence of keys
like @kbd{M-e}, or @kbd{F9}, or @kbd{F3 alt-tab e e enter}.

@node splitting eev.el, eesteps, e-scripts, introduction
@comment  node-name,  next,  previous,  up
@section Splitting eev.el


@example
[See:]
(find-eev "eev.el" "find-man")
(find-eev "eev-mini.el" "find-man")
@end example

@cindex find-man
@cindex eeman

When I first submittted eev for inclusion in GNU Emacs, in 1999,
the people at the FSF requested some changes. One of them was to split
eev.el --- the code at that point was all in a single Emacs Lisp file,
called eev.el --- into several separate source files according to
functionality; at least the code for saving temporary scripts and the
code for hyperlinks should be kept separate.

It turned out that that was the wrong way of splitting eev. The
frontier between what is a hyperlink and what is a block of commands
is blurry:


@example
man foo
man -P 'less +/bar' foo
# (eev "man foo")
# (eev "man -P 'less +/bar' foo")
# (find-man "foo" "bar")
@end example


The two @samp{man} commands above can be considered as hyperlinks to a
manpage, but we need to send those commands to a shell to actually
open the manpage; the option @samp{-P 'less +/bar'} instructs
@samp{man} to use the program @samp{less} to display the manpage, and it
tells @samp{less} to jump to the first occurrence of the string
@samp{bar} in the text, and so it is a hyperlink to a specific
position in a manpage. Each of the two @samp{eev} lines, when
executed, saves one of these @samp{man} commands to the temporary
script file; because they contain Lisp expressions they look much more
like hyperlinks than the @samp{man} lines. The last line,
@code{find-man}, behaves much more like a ``real'' hyperlink: it opens
the manpage @emph{inside Emacs} and searches for the first occurrence of
@samp{bar} there; but Emacs's code for displaying manpages was tricky,
and it took me a few years to figure out how to add support for
pos-spec-lists to it...

So, what happens is that often a new kind of hyperlink will begin its
life as a series of shell commands (another example: using @samp{gv
--page 14 file.ps} to open a PostScript file and then jump to a
certain page) and then it takes some time to make a nice hyperlink
function that does the same thing; and often these functions are
implemented by executing commands in external programs.

There's a much better way to split conceptually what eev does, though.
Most functions in eev take a region of text (for example Emacs's own
``selected region'', or the extent of Lisp expression coming before
the cursor) and ``execute'' that in some way; the kinds of regions
are:


@example
Emacs's (selected) region   | M-x eev, M-x eelatex (sec. 4)
----------------------------+------------------------------
last-sexp (Lisp expression  | C-x C-e, M-E         (sec. 5)
at the left of the cursor)  | 
----------------------------+------------------------------
sexp-eol (go to end of      | C-e C-x C-e, M-e     (sec. 7)
line, then last-sexp)       |
----------------------------+------------------------------
bounded region              | F3, M-x eev-bounded,
                            | M-x eelatex-bounded (sec. 14)
----------------------------+------------------------------
bounded region around       | (ee-at [`` anchor] ...)
anchor                      |                     (sec. 20)
----------------------------+------------------------------
current line                | F9                  (sec. 15)
----------------------------+------------------------------
no text (instead use the    | F12                 (sec. 19)
next item in a list)        |
@end example




@example
Actions (can be composed):
  * Saving a region or a string into a file
  * Sending a signal to a process
  * Executing as Lisp
  * Executing immediately in a shell
  * Start a debugger
@end example


((Emacs terminology: commands))

@node eesteps, eepitch, splitting eev.el, introduction
@comment  node-name,  next,  previous,  up
@section eesteps


@example
[See:]
(find-efunctiondescr 'eesteps)
(find-eev "eev-steps.el"      "eesteps")
(find-eev "eev-mini-steps.el" "eesteps")
http://angg.twu.net/flipbooks/eesteps.html
@end example

@cindex eesteps
@cindex eek
@cindex F12

((Simple examples))

((writing demos))

((hyperlinks for which no short form is known))

((producing animations and screenshots))

@node eepitch, eepitch and rcfiles, eesteps, introduction
@comment  node-name,  next,  previous,  up
@section Sending lines to processes running in Emacs buffers


@example
[See:]
(find-es "davinci" "eepitch-gdb")
@end example

@cindex eepitch
@cindex find-comintprocess
@cindex F8
@cindex tar without -C

(These sections - 20 to 24 - are very new (handwritten in 2007jul12,
typed a few days later). They are early drafts, full of errors,
describing some code that does not yet exist (ee-tbr), etc. Also, I
don't know Rubikitch's real name, so I used a random Japanese name...)


Emacs can run external programs interactively inside buffers; in the
screenshot in Figure 5 there's a shell running in the buffer "*shell*"
in the lower window. Technically, what is going on is much more
complex than what we described in the previous section. The shell runs
in a pseudo-terminal (pty), but ptys are usually associated to
rectangular grids of characters with a definite width and height,
while in an Emacs buffer the width of each line, and the total number
of lines,are only limited by memory constraints. Many interactive
programs expect their input to come through their more-or-less
minimalistic line editors, that may try to send to the terminal
commands like "clear the screen" or "go to column x at line y"; how
should these things be handled in a shell buffer? Also, the user can
move freely in a shell buffer, and edit its contents as text, but the
"Return" key becomes special: when it is hit in a shell buffer Emacs
takes the current line - except maybe some initial characters that are
seen as a prompt - and sends that to the shell process, as if the user
had typed exactly that; so, Emacs takes over the line editor of the
shell process completely. The translation between character sequences
going through the pty and buffer-editing functions is very tricky,
full of non-obvious design choices, and even though it has been around
for more than 20 years it still has some (inevitable) quirks.

I almost never used shell buffers, so I found the following idea, by
OGAMI Itto, very surprising when he sent it to the eev mailing list in
2005.


@example
(find-eevfile "doc/shot-f8.png")
(find-anggfile "IMAGES/eepitch-gdb.png")
(Figure 5 will be a screenshot that I haven't taken yet.)
(It will be simpler than the screenshot from Fig. 6,
 that is this: http://angg.twu.net/IMAGES/eepitch-gdb.png )
@end example


The current window, above in Figure 5, is editing an e-script, and
the other window shows a shell buffer - that we will refer to as the
"target buffer". When the user types a certain key - by default F8 -
the current line is sent to the target buffer, and the point is moved
down to the next line; pressing F8 n times in sequence sendsn lines,
one by one.

One detail: "sending a line" means inserting its contents - except
the newline - at the current position in the target buffer, and then
running there the action associated to the "Return" key. "Return" is
almost always a special key, bound to different actions in different
major modes, so just inserting a newline would not work - that would
not simulate what happens when a user types "Return".

F8-is-simpler-than-F9
---------------------

Note that, in a sense, the action of F8 is much more complex than
that of F9, described in the last section; but user might perceive F8
as being much simpler, as there are no external programs involved
(Expect, eegchannel, xterm), and no setup hassles - all the machinery
to make Emacs buffers invoke external processes in buffers pretending
to be terminals ("comint mode") comes built-in with Emacs since the
early 1980s.

Ogami's idea also included three "bonus features": window setup,
reconstruction of the target buffer, and star-escapes. In the default
Emacs setting some commands - M-x shell between them - might split the
current Emacs frame in two windows; none of eev's hyperlink functions
do that, and I have always felt that it is more natural to use eev with
a setting (pop-up-windows set to nil) that disables window splittings
except when explicitly requested by the user. Anyway: M-x shell
ensures that a "*shell*" buffer is visible in a window, and that a
shell process is running in it; this setup code for F8,


@example
(eepitch '(shell))
@end example


@noindent splits the window (if the frame has just one window), and runs
`(shell)' in the other window - with the right defaults - to force
that window to display a shell buffer with a live shell process
running in it; it also sets a variable, `eepitch-target-buffer', to
that buffer, so that the next `F8's will have a definite buffer to
send lines too - as target buffers need not necessarily be shell
buffers.

As for the star-escapes, it's the same idea as with F9: when a line
starts with a red star glyph, running F8 on it executes everything on
it - after the red star - as Lisp, and if there are no errors the
point is moved down. So lines starting with a red star can be used to
set up an eepitch target, to switch to another target, or to do
special actions - like killing a certain target so that it will be
reconstructed anew by the next F8. Note that once that we recognize
that a region of an e-script is to be used by eepitch there is only
one key to be used to "run" each of its lines, both the ones with red
stars and the ones without: F8. However, as with F9, the user must
know what to expect after each step. A badly-written e-script for
eepitch may try, for example, to "cd" into a directory that does not
exist, and if the next line is, say, @samp{tar -xvzf
$S/http/foo/bar.tgz} then it will try to unpack a tarball into the
wrong place, creating a big mess.

@node eepitch and rcfiles, eepitch-gud, eepitch, introduction
@comment  node-name,  next,  previous,  up
@section Using eepitch to control unprepared shells


@example
[See:]
(find-eevfile "eev.el" "EEVDIR")
(find-eevfile "eev.el")
@end example


As we have seen in section 4, M-x eev sends the region to a
"prepared shell"; if the shell has the right settings for the
environment variables $EEVTMPDIR and $EE, and if it has the shell
function `ee', then running `ee' in the shell "sources" the temporary
script - corresponding to the regin - in verbose mode. Well, if Emacs
loads eev.el and the environment variables $EEVDIR, $EEVTMPDIR and $EE
are not set, then they are set, respectively, to the directory where
eev.el was read from, to the subdirectory of it given by $EEVDIR/tmp,
and to the file $EEVTMPDIR/ee.sh. Processes started from Emacs inherit
these environment variables, so a shell buffer created by running F8
on these two lines,


@verbatim
* (eepitch-shell)
function ee () { set -v; . $EE; set +v; }
@end verbatim


@noindent will be running a prepared shell. Such buffers can be used to let
users understand better how prepared shells work, and decide if they
want to patch their initialization files for the shell (see
eev-rctool) so that their shells will be "prepared" by default.

(Note: I haven't yet played much with this idea - discuss
running eev-rctool on such shells (and a function that creates a
buffer with an e-script for that), and loading psne.sh from an
unprepared shell).

@node eepitch-gud, eepitch-gdb, eepitch and rcfiles, introduction
@comment  node-name,  next,  previous,  up
@section Controlling debuggers with eepitch


@example
[See:]
(find-angg ".emacs" "eepitch-gdb")
http://angg.twu.net/.emacs.html#eepitch-gdb
http://article.gmane.org/gmane.emacs.eev.devel/47
http://lists.gnu.org/archive/html/eev/2007-07/msg00000.html
(find-node "(emacs)Debuggers")
(find-node "(gdb)Top")
@end example


On *NIX it is common to keep debuggers separated into two parts: a
back-end, with a simple textual interface, and a front-end, that
controls the back-end via its textual interface but presents a better
interface, showing source files and breakpoints in a nice way, etc.
The GNU Debugger, GDB, is a back-end, and it can be used to debug and
single-step several compiled languages; the "Grand Unified Debugger"
mode of Emacs, a.k.a. GUD, is a front-end for GDB and other
back-ends.

Usually, GUD splits an Emacs frame into two windows, one for
interaction with GDB (or other back-end, but let's say just "GDB" for
simplicity), and another one for displaying the source file where the
execution is. Some of the output of GDB - lines meaning, e.g., "we're
at the source file foo.c, at line 25" - are filtered by GUD and are
not shown in the GUD buffer; and the user can press special key
sequences on source files that generate commands to GDB - like, "set a
breakpoint on this line".

In order to control GDB with eepitch we need a window setting with
three windows, like in the screenshot in Figure 6.



@example
http://article.gmane.org/gmane.emacs.eev.devel/47
http://lists.gnu.org/archive/html/eev/2007-07/msg00000.html
http://lists.gnu.org/archive/html/eev/2007-07/pngXBfRlWr29Z.png
(find-anggfile "IMAGES/eepitch-gdb.png")
@end example


The way to set up that does not integrate very well with the
"standard" eepitch at this moment, but that should come with time.

@node eepitch-gdb, little debugging languages, eepitch-gud, introduction
@comment  node-name,  next,  previous,  up
@section E-scripting GDB with eepitch


@example
[See:]
# (find-node "(gdb)Set Breaks" "`tbreak ARGS'")
# (find-node "(elisp)The Buffer List")
# (find-es "lua5" "lua-api-from-gdb")
# (find-TH "luaforth" "lua-api-from-gdb")
@end example


We can use elisp hyperlinks to point to specific lines in source
files - and we can combine these hyperlinks with the code to set up
breakpoints, in two ways.


@example
*;(find-lua51file "src/lvm.c" "case OP_CLOSE:" 1)
* (find-lua51file "src/lvm.c" "case OP_CLOSE:" 1 '(ee-tbr))
@end example


The first line above contains an elisp hyperlink to a line in the
source of Lua. Actually, it points to the code for an opcode in Lua's
virtual machine that most people find rather mysterious. As the line
starts with `*;', an F8 on it executes a Lisp comment - i.e., does
nothing - and moves down; only a `M-e' (or a `C-e C-x C-e') on that
line would follow the hyperlink.

The second line, when executed with F8, would go to that line in
the source, then run `(ee-tbr)' there; ee-tbr invokes gud-tbr to set a
temporary breakpoint on that source line (i.e., one that is disabled
when the execution stops there for the first time), and then buries
the buffer - the one with "lmv.c" - like a `M-K' would do; the effect
is that the buffer in that window - the top-left window in a situation
like in Figure 6 - does not change, it will still show the e-script.

A variation on this is to wrap the hyperlink in an ee-tbr:


@example
* ;        (find-lua51file "src/lvm.c" "case OP_CLOSE:" 1)
* (ee-tbr '(find-lua51file "src/lvm.c" "case OP_CLOSE:" 1))
@end example


When ee-tbr is called with an argument it evaluated the argument
inside a save-excursion, and sets a breakpoint there; the effect is
almost the same as the previous case, but this does not change the
order of the buffers in the buffer list.

@node little debugging languages, inspecting data, eepitch-gdb, introduction
@comment  node-name,  next,  previous,  up
@section Two little languages for debugging

E-scripts for eepitch and GDB can be used to bring programs to a
certain point (and to inspect their data structures there; we will
have more to say about this in the next section). In a sense, as in
[Bentley], these e-scripts are written in a language that describes
states of running programs - and they can be executed step by step.

These e-scripts, being executable, can be used in e-mails to
communicate particular states of programs - say, where a certain bug
occurs. Unfortunately, they are too fragile and may cease working
after minimal changes in the program, and they are almost impossible
to read...

However, the screenshot in Figure 5 suggests another language for
communicating controlling programs with GDB: the contents of the
"*gud*" buffer. After removing some excess verbosity by hand we get
something that is readable enough if included in e-mails - and to
extract the original commands from that we just have to discard the
lines that don't start with "(gdb)", then remove the "(gdb)" prompts.
As for the hyperlinks with `(ee-tbr)', they may need to be copied to
the GUD buffer, and not filtered out; we still need to experiment with
different ways to do that to be able to choose one.

@node inspecting data, big modular e-scripts, little debugging languages, introduction
@comment  node-name,  next,  previous,  up
@section Inspecting data in running programs

Almost anyone who has learned a bit of Lisp should be familiar with
this kind of box diagrams. After running


@example
(setq x '(5 "ab"))
(setq y (list x x '(5 "ab")))
@end example


@noindent the value of y can be represented by:


@example
 ___ ___       ___ ___             ___ ___    
|___|___| --> |___|___| --------> |___|___| --> nil
  | ___________/                    |
  |/                                |
 _v_ ___       ___ ___             _v_ ___       ___ ___       
|___|___| --> |___|___| --> nil   |___|___| --> |___|___| --> nil
  |             |                   |             |
  v             v                   v             v
  5            "ab"                 5            "ab"
@end example


This representation is very nice - it omits lots of details that are
usually irrelevant, like the address in the memory of each cons, and
the exact names of each struct in C and their fields. But sometimes we
need to understand the implementation in C, and a more complete
diagram would be convenient. At least, we would like to know how to
get, in the C source of Emacs, from the address of the leftmost cons
in the top line to the rightmost "ab" in the bottom line - but how do
we express following the "cdr" arrows, the "car" arrows, and
extracting the contents of a string object in elisp, One solution is
to use GDB, and e-scripts for it:

((...))

A "complete diagram" corresponding to the one above, whatever the
format that we choose to draw it, should include some information
explaining that "cdr" arrows correspond to "->cdr", "car" arrows
correspond to ..., and each string object corresponds to another kind
of box different from the cons boxes; to get to the C string stored in
an elisp string object we should examine its "foo" field, i.e., do a
"->foo".

Obviously, this same idea applies also to other programs with
complex data structures - and for some programs we may even have
fancier ways to explore their data structures; for example, in a
graphic toolkit it might be possible to change the background of a
button to orange from GDB.

@node big modular e-scripts, iskidip, inspecting data, introduction
@comment  node-name,  next,  previous,  up
@section Big Modular E-scripts


@example
[See:]
% (find-eevex "screenshots.e" "fisl-screenshots-modular")
% (find-eimage0 "./ss-modular.png")
% (find-fline     "ss-modular.png")
% (find-es "tex" "png_screenshots")
% (find-fline "README" "ss-modular")
@end example


A shell can be run in two modes: either interactively, by expecting
lines from the user and executing them as soon as they are received
[[footnote: except for multi-line commands]], or by scripts: in the
later case the shell already has access to the commands, and executes
them in sequence as fast as possible, with no pause between one
command and the next.

When we are sending lines to a shell with F9 we are telling it not
only @emph{what} to execute but also @emph{when} to execute it; this is
somewhat similar to running a program step-by-step inside a debugger
--- but note that most shells provide no single-stepping facilities.

We will start with a toy example --- actually the example from
[Section anchors] with five new lines added at the end --- and
then in the next section we will see a real-world example that uses
these ideas.


@example
  Figure 4: sending a block at once with eevnow-at
  (find-fline "ss-modular.png")

  Figure 5: single-stepping through a C program
  (find-fline "ss-gdbwide.png")
@end example


((Somewhere between a script and direct user interaction))

((No loops, no conditionals))

((Several xterms))

@node iskidip,  , big modular e-scripts, introduction
@comment  node-name,  next,  previous,  up
@section Internet Skills for Disconnected People

Suppose that we have a person @emph{P} who has learned how to use a
computer and now wants to learn how the internet works. That person
@emph{P} knows a bit of programming and can use Emacs, and sure she can
use e-mail clients and web browsers by clicking around with the mouse,
but she has grown tired of just using those things as black boxes; now
she wants to experiment with setting up HTTP and mail servers, to
understand how data packets are driven around, how firewalls can block
some connections, such things.

The problem is that [IT P] has never had access to any machine
besides her own, which is connected to the internet only through a
modem; and also, she doesn't have any friends who are computer
technicians or sysadmins, because from the little contact that she's
had with these people she's got the impression that they live lifes
that are almost as grey as the ones of factory workers, and she's
afraid of them. To add up to all that, [IT P] has some hippie job that
makes her happy but poor, so she's not going to buy a second computer,
and the books she can borrow, for example, Richard Stevens' series on
TCP/IP programming, just don't cut.

One of eev's intents isto make life easier for autodidacts. Can it
be used to rescue people in positions like [IT P]'s(4)? It was
thinking on that that I created a side-project to eev called [``
Internet Skills for Disconnected People]: it consists of e-scripts
about running a second machine, called the [`` guest], emulated inside
the [`` host], and making the two talk to each other via standard
internet protocols, via emulated ethernet cards. Those e-scripts make
heavy use of the concepts in the last section ((...))


@example
  Figure 6: a call map
  (find-fline "iskidip.png")
  (find-eimage0 "./iskidip.png")

% (find-eevex "busybox.e" "bb_chroot_main")
% (find-eevex "busybox.e" "bbinitrd-qemu-main")
% (find-eevex "busybox.e" "iso-qemu-main")
% (find-eevex "busybox.e" "iso-qemu-main-2")
@end example


(4). by the way, I created [IT P] inspired on myself; my hippie job
is being a mathematician.

@node loose ends, index, introduction, Top
@comment  node-name,  next,  previous,  up
@chapter Loose ends


@example
[See:]
What is automating a task?
A tree of states
  (find-eevfile "README-0.95.2")
actors, colors, and tones of voice

manpages from remote machines:
  http://article.gmane.org/gmane.emacs.eev.devel/107
flipbooks
  (find-eev "eev-sshot.el")
  (find-TH "emacs" "flipbooks")
templates
  (find-eev "eev-insert.el" "ee-template")
brep
  (find-eev "eev-browse-url.el")
math glyphs (and fonts)
  (find-eev "eev-math-glyphs.el")
eepitch-wrap
  (find-eev "eev-insert.el" "ee-wrap-eepitch")
@end example


@menu
* this document::               This document
* eev manifesto::               The eev manifesto
* dedication::                  Dedication
* eev-mode-map::                eev-mode-map
* alternative to customize::    A Lisp-ish alternative to customize
* running TeX::                 Running TeX
* ee-wrap::                     ee-wrap
* htmlizing::                   Htmlizing e-scripts
@end menu

@node this document, eev manifesto, loose ends, loose ends
@comment  node-name,  next,  previous,  up
@section This document

This document is a @emph{very preliminary} conversion to TeXinfo of the
``eev article'', whose HTML and source are at:


@example
http://angg.twu.net/eev-article.html
http://angg.twu.net/TH/eev-article.blogme
@end example


Not only there are many incomplete sections, but there many things in
the conversion that should ``work'', and that currently don't: the
``See:'' blocks, the embedded e-scripts (the ones with delimited
regions and the ones with lines starting with red stars can't be
indented), the anchors in the section about anchors (because
@code{ee-anchor-format} should be adjusted to non-unibyte encoding of
the info buffer)...

Also, at present it is not possible to generate dvi/ps/pdf files and
working HTML (with all the elisp hyperlinks htmlized, etc) from the
.texi file. Well, whatever.

The .texi file is generated by running a .texi.lua file through the
Lua interpreter. The .texi.lua contains some macro definitions for a
simple - and undocumented - preprocessor, and the marked-up text that
becomes the .texi file. The .texi.lua and the preprocessor are not
included in the eev tarball, but they can be fetched from:


@example
http://angg.twu.net/TEXINFO/eev.texi.lua.html
http://angg.twu.net/LUA/preproc.lua.html
@end example


@node eev manifesto, dedication, this document, loose ends
@comment  node-name,  next,  previous,  up
@section The eev manifesto


@example
[See:]
(find-eev "doc/EEVMANIFESTO")
@end example


@node dedication, eev-mode-map, eev manifesto, loose ends
@comment  node-name,  next,  previous,  up
@section Dedication


@example
[See:]
(find-eev "DEDICATION")
(find-eev "DEDICATION.c-r")
@end example


@node eev-mode-map, alternative to customize, dedication, loose ends
@comment  node-name,  next,  previous,  up
@section eev-mode-map


@example
[See:]
http://lists.gnu.org/archive/html/eev/2008-04/msg00014.html
http://article.gmane.org/gmane.emacs.eev.devel/99
(find-evariable 'eev-mode-map)
@end example

@cindex eev-mode-map


@node alternative to customize, running TeX, eev-mode-map, loose ends
@comment  node-name,  next,  previous,  up
@section A Lisp-ish alternative to customize


@example
[See:]
http://lists.gnu.org/archive/html/eev/2005-12/msg00008.html
http://article.gmane.org/gmane.emacs.eev.devel/34
(find-evariable 'ee-hyperlink-prefix)
(find-efunction 'ee-hyperlink-prefix)
(find-eev "eev-insert.el" "ee-hyperlink-prefix")
(find-eev "eev-mini.el" "ee-hyperlink-prefix")
@end example

@cindex ee-hyperlink-prefix
@cindex customize


@node running TeX, ee-wrap, alternative to customize, loose ends
@comment  node-name,  next,  previous,  up
@section Running TeX


@example
[See:]
(find-es "tex")
@end example

@cindex TeX
@cindex LaTeX

@verbatim
* (eepitch-tex)
* (eepitch-kill)
* (eepitch-tex)
\tracingonline=1\scrollmode
@end verbatim


@node ee-wrap, htmlizing, running TeX, loose ends
@comment  node-name,  next,  previous,  up
@section ee-wrap


@example
[See:]
(find-efunction 'ee-wrap-file)
@end example


@node htmlizing,  , ee-wrap, loose ends
@comment  node-name,  next,  previous,  up
@section Htmlizing e-scripts


@example
[See:]
(find-blogme3 "Makefile")
@end example

@cindex blogme3


@node index,  , loose ends, Top
@comment  node-name,  next,  previous,  up
@unnumbered Index



@printindex cp
@contents

@c Local Variables:
@c coding: raw-text-unix
@c End:

@bye